* There's a problem with gnatclean on Windows GNAT Community 2018
@ 2018-06-12 16:26 fabien.chouteau
2018-06-12 16:47 ` Dmitry A. Kazakov
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: fabien.chouteau @ 2018-06-12 16:26 UTC (permalink / raw)
Hi all,
We want to let you know that a problem was detected in the 2018 Community
release for Windows.
Because of the installer, the run-time .ali files are not marked as read only.
As a result, gnatclean will remove all the .ali files from the installation,
including those of the run-time.
Until we release a fix, you can use these commands to mark the .ali as read
only:
$ cd <path_to_the_installation>
$ attrib +r /s *.ali
That's it :)
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: There's a problem with gnatclean on Windows GNAT Community 2018
2018-06-12 16:26 There's a problem with gnatclean on Windows GNAT Community 2018 fabien.chouteau
@ 2018-06-12 16:47 ` Dmitry A. Kazakov
2018-06-12 18:04 ` fabien.chouteau
2018-06-12 18:49 ` Anh Vo
2018-06-12 19:04 ` Simon Wright
2 siblings, 1 reply; 7+ messages in thread
From: Dmitry A. Kazakov @ 2018-06-12 16:47 UTC (permalink / raw)
On 2018-06-12 18:26, fabien.chouteau@gmail.com wrote:
> We want to let you know that a problem was detected in the 2018 Community
> release for Windows.
>
> Because of the installer, the run-time .ali files are not marked as read only.
> As a result, gnatclean will remove all the .ali files from the installation,
> including those of the run-time.
>
> Until we release a fix, you can use these commands to mark the .ali as read
> only:
> $ cd <path_to_the_installation>
> $ attrib +r /s *.ali
>
> That's it :)
When does this happen? I am asking because I did clean projects from the
GPS, I suppose that in the end it calls gnatclean too. No installation
files were deleted to me.
P.S. What about 32-bit Windows GNAT 2018. Is it dropped?
P.P.S. Is Win32Ada dropped?
--
Regards,
Dmitry A. Kazakov
http://www.dmitry-kazakov.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: There's a problem with gnatclean on Windows GNAT Community 2018
2018-06-12 16:47 ` Dmitry A. Kazakov
@ 2018-06-12 18:04 ` fabien.chouteau
0 siblings, 0 replies; 7+ messages in thread
From: fabien.chouteau @ 2018-06-12 18:04 UTC (permalink / raw)
On Tuesday, June 12, 2018 at 6:47:11 PM UTC+2, Dmitry A. Kazakov wrote:
> When does this happen? I am asking because I did clean projects from the
> GPS, I suppose that in the end it calls gnatclean too. No installation
> files were deleted to me.
When gnatclean is used, in your case it was probably gprclean which is not impacted by this problem.
>
> P.S. What about 32-bit Windows GNAT 2018. Is it dropped?
>
Yes, we switched to 64-bit because it was requested a lot.
> P.P.S. Is Win32Ada dropped?
>
Win32Ada is not in the Community release.
Regards,
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: There's a problem with gnatclean on Windows GNAT Community 2018
2018-06-12 16:26 There's a problem with gnatclean on Windows GNAT Community 2018 fabien.chouteau
2018-06-12 16:47 ` Dmitry A. Kazakov
@ 2018-06-12 18:49 ` Anh Vo
2018-06-12 19:04 ` Simon Wright
2 siblings, 0 replies; 7+ messages in thread
From: Anh Vo @ 2018-06-12 18:49 UTC (permalink / raw)
On Tuesday, June 12, 2018 at 9:26:34 AM UTC-7, fabien....@gmail.com wrote:
> Hi all,
>
> We want to let you know that a problem was detected in the 2018 Community
> release for Windows.
>
> Because of the installer, the run-time .ali files are not marked as read only.
> As a result, gnatclean will remove all the .ali files from the installation,
> including those of the run-time.
>
> Until we release a fix, you can use these commands to mark the .ali as read
> only:
> $ cd <path_to_the_installation>
> $ attrib +r /s *.ali
>
> That's it :)
All the sources should be read only, too.
Anh Vo
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: There's a problem with gnatclean on Windows GNAT Community 2018
2018-06-12 16:26 There's a problem with gnatclean on Windows GNAT Community 2018 fabien.chouteau
2018-06-12 16:47 ` Dmitry A. Kazakov
2018-06-12 18:49 ` Anh Vo
@ 2018-06-12 19:04 ` Simon Wright
2018-06-19 11:47 ` juan.delapuente
2 siblings, 1 reply; 7+ messages in thread
From: Simon Wright @ 2018-06-12 19:04 UTC (permalink / raw)
fabien.chouteau@gmail.com writes:
> We want to let you know that a problem was detected in the 2018
> Community release for Windows.
Thank you.
> Because of the installer, the run-time .ali files are not marked as
> read only. As a result, gnatclean will remove all the .ali files from
> the installation, including those of the run-time.
>
> Until we release a fix, you can use these commands to mark the .ali as
> read only:
> $ cd <path_to_the_installation>
> $ attrib +r /s *.ali
The same seems to be true in
gnat-community-2018-20180523-arm-elf-darwin-bin.dmg.
Is this a gprinstall issue? Because I see the same in packages such as
gnatcoll* installed in gcc-8.1.0 for Darwin, and in RTSs installed in
cortex-gnat-rts.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: There's a problem with gnatclean on Windows GNAT Community 2018
2018-06-12 19:04 ` Simon Wright
@ 2018-06-19 11:47 ` juan.delapuente
2018-06-19 15:26 ` Simon Wright
0 siblings, 1 reply; 7+ messages in thread
From: juan.delapuente @ 2018-06-19 11:47 UTC (permalink / raw)
The fix for MacOS (both native and arm-eabi:
$ cd <path_to_the_installation>
$ find . -iname "*.ali" -exec chmod -w {} \;
El martes, 12 de junio de 2018, 20:04:44 (UTC+1), Simon Wright escribió:
:
>
> > We want to let you know that a problem was detected in the 2018
> > Community release for Windows.
>
> Thank you.
>
> > Because of the installer, the run-time .ali files are not marked as
> > read only. As a result, gnatclean will remove all the .ali files from
> > the installation, including those of the run-time.
> >
> > Until we release a fix, you can use these commands to mark the .ali as
> > read only:
> > $ cd <path_to_the_installation>
> > $ attrib +r /s *.ali
>
> The same seems to be true in
> gnat-community-2018-20180523-arm-elf-darwin-bin.dmg.
>
> Is this a gprinstall issue? Because I see the same in packages such as
> gnatcoll* installed in gcc-8.1.0 for Darwin, and in RTSs installed in
> cortex-gnat-rts.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: There's a problem with gnatclean on Windows GNAT Community 2018
2018-06-19 11:47 ` juan.delapuente
@ 2018-06-19 15:26 ` Simon Wright
0 siblings, 0 replies; 7+ messages in thread
From: Simon Wright @ 2018-06-19 15:26 UTC (permalink / raw)
juan.delapuente@gmail.com writes:
> The fix for MacOS (both native and arm-eabi:
Thanks for this. And maybe Linux too?
> $ cd <path_to_the_installation>
> $ find . -iname "*.ali" -exec chmod -w {} \;
I said
$ find -name \*.ali | sudo xargs chmod -w
Would be surprised to find (library) ALI files with mixed-case
filenames!
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-06-19 15:26 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-12 16:26 There's a problem with gnatclean on Windows GNAT Community 2018 fabien.chouteau
2018-06-12 16:47 ` Dmitry A. Kazakov
2018-06-12 18:04 ` fabien.chouteau
2018-06-12 18:49 ` Anh Vo
2018-06-12 19:04 ` Simon Wright
2018-06-19 11:47 ` juan.delapuente
2018-06-19 15:26 ` Simon Wright
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox