From: Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP>
Subject: Re: GNAT.Serial_Communications
Date: Sat, 16 Apr 2011 08:29:54 +0000 (UTC)
Date: 2011-04-16T08:29:54+00:00 [thread overview]
Message-ID: <iobk21$dis$1@dont-email.me> (raw)
In-Reply-To: 0d509f1c-4ca7-4595-a026-65c108558d76@bl1g2000vbb.googlegroups.com
On 2011-04-15, tonyg <tonythegair@gmail.com> wrote:
>
> This is making a lot of sense to me. Minicom is working perfectly with
> setting the commands on the electronics. However for some reason, the
> same commands relayed by the ada program are simply not received.
>
> There does not seem a way in GNAT.Serial_Communications to disable
> hardware and software flow control, I'll have a look at how linux does
> it.
Have you compared the _full_ output from stty yet when Minicom and your
program are running ?
As I mention above, there are other possible failure modes and the full
output from stty will tell you if flow control is enabled on the port or
not. Checking the flow control is just the first thing I would check;
it is not the only thing.
Read the man page for stty. :-) You may save yourself quite a bit of time
if the flow control settings are not the problem.
Simon.
--
Simon Clubley, clubley@remove_me.eisner.decus.org-Earth.UFP
Microsoft: Bringing you 1980s technology to a 21st century world
next prev parent reply other threads:[~2011-04-16 8:29 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 10:26 GNAT.Serial_Communications tonyg
2011-04-11 11:11 ` GNAT.Serial_Communications Brian Drummond
2011-04-13 7:49 ` GNAT.Serial_Communications tonyg
2011-04-13 14:12 ` GNAT.Serial_Communications Alex Mentis
2011-04-13 21:12 ` GNAT.Serial_Communications tonyg
2011-04-14 13:15 ` GNAT.Serial_Communications Alex Mentis
2011-04-14 17:52 ` GNAT.Serial_Communications Chris Moore
2011-04-15 13:58 ` GNAT.Serial_Communications tonyg
2011-04-15 16:32 ` GNAT.Serial_Communications tonyg
2011-04-15 17:12 ` GNAT.Serial_Communications Simon Clubley
2011-04-15 17:32 ` GNAT.Serial_Communications tonyg
2011-04-15 18:49 ` GNAT.Serial_Communications Simon Clubley
2011-04-16 0:07 ` GNAT.Serial_Communications tonyg
2011-04-16 8:29 ` Simon Clubley [this message]
2011-04-16 10:19 ` GNAT.Serial_Communications tonyg
2011-04-16 10:33 ` GNAT.Serial_Communications tonyg
2011-04-16 11:15 ` GNAT.Serial_Communications Brian Drummond
2011-04-16 12:03 ` GNAT.Serial_Communications tonyg
2011-04-16 15:12 ` GNAT.Serial_Communications Simon Clubley
2011-04-18 20:31 ` GNAT.Serial_Communications tonyg
2011-04-18 20:43 ` GNAT.Serial_Communications tonyg
2011-04-19 11:46 ` GNAT.Serial_Communications tonyg
2011-04-19 12:09 ` GNAT.Serial_Communications Ludovic Brenta
2011-04-19 13:53 ` GNAT.Serial_Communications tonyg
2011-04-19 19:06 ` GNAT.Serial_Communications Ludovic Brenta
2011-04-19 19:57 ` GNAT.Serial_Communications Alex Mentis
2011-04-20 11:37 ` GNAT.Serial_Communications tonyg
2011-04-20 14:22 ` GNAT.Serial_Communications Alex Mentis
2011-04-21 9:00 ` GNAT.Serial_Communications tonyg
2011-04-21 13:28 ` GNAT.Serial_Communications Alex Mentis
2011-04-22 13:55 ` GNAT.Serial_Communications Alex Mentis
2011-04-22 15:52 ` GNAT.Serial_Communications Brian Drummond
2011-04-19 13:32 ` GNAT.Serial_Communications Simon Clubley
2011-04-19 16:59 ` GNAT.Serial_Communications Simon Clubley
2011-04-20 10:17 ` GNAT.Serial_Communications Brian Drummond
2011-04-20 20:46 ` GNAT.Serial_Communications Brian Drummond
2011-04-21 4:28 ` GNAT.Serial_Communications Simon Wright
2011-04-21 9:12 ` GNAT.Serial_Communications tonyg
2011-04-21 10:14 ` GNAT.Serial_Communications tonyg
2011-04-22 15:54 ` GNAT.Serial_Communications Brian Drummond
2011-04-22 16:14 ` GNAT.Serial_Communications Simon Wright
2011-04-21 11:56 ` GNAT.Serial_Communications Simon Clubley
2011-04-15 18:01 ` GNAT.Serial_Communications Jeffrey Carter
2011-04-16 10:21 ` GNAT.Serial_Communications tonyg
2016-12-01 19:58 ` GNAT.Serial_Communications mario.blunk.gplus
2017-03-20 15:20 ` GNAT.Serial_Communications Jacob Sparre Andersen
replies disabled
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox