Uninitialized "out" parameters

Uninitialized "out" parameters

[Paul Whittington]

In the following Ada program, should either the compiler or the run-time
get some kind of error because the out parameter is not initialized?

procedure Testit is

  procedure SubP (op : out Integer) is
  begin
    op := op+1;
  end SubP;

  I : Integer;

begin
  SubP (I);
end Testit;

Re: Uninitialized "out" parameters

[Adam Beneschan]

Paul Whittington <paul@sage.inel.gov> writes:
 >In the following Ada program, should either the compiler or the run-time
 >get some kind of error because the out parameter is not initialized?
 >
 >procedure Testit is
 >
 >  procedure SubP (op : out Integer) is
 >  begin
 >    op := op+1;
 >  end SubP;
 >
 >  I : Integer;
 >
 >begin
 >  SubP (I);
 >end Testit;

Well, you can't read an "out" parameter at all, so it's illegal to use
"op" in the right-hand side of your assignment.  So the compiler
should give you an error.  Also, in Ada83, you'll get an error because
I needs to be declared before the code for SubP appears.

If you change op to an "in out" parameter, you'll be reading an
uninitialized variable, but typically neither the compiler nor the
runtime will complain.

                                -- Adam

Re: Uninitialized "out" parameters

[Robert Dewar]

Adam said

"Well, you can't read an "out" parameter at all, so it's illegal to use
"op" in the right-hand side of your assignment.  So the compiler
should give you an error.  Also, in Ada83, you'll get an error because
I needs to be declared before the code for SubP appears.

If you change op to an "in out" parameter, you'll be reading an
uninitialized variable, but typically neither the compiler nor the
runtime will complain."

That's quite wrong, you can definitely read out parameters in Ada. (this is
a new feature, you couldn't read out parameters in Ada 83, which explains
Adam's mistake). Anyway, an Ada compiler definitely must NOT give an 
error for this program (it may give a warning).

Re: Uninitialized "out" parameters

[Pascal Obry]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1803 bytes --]


adam@irvine.com (Adam Beneschan) wrote:

>Paul Whittington <paul@sage.inel.gov> writes:
> >In the following Ada program, should either the compiler or the run-time
> >get some kind of error because the out parameter is not initialized?
> >
> >procedure Testit is
> >
> >  procedure SubP (op : out Integer) is
> >  begin
> >    op := op+1;
> >  end SubP;
> >
> >  I : Integer;
> >
> >begin
> >  SubP (I);
> >end Testit;

>Well, you can't read an "out" parameter at all, so it's illegal to use
>"op" in the right-hand side of your assignment.  So the compiler
>should give you an error.  Also, in Ada83, you'll get an error because
>I needs to be declared before the code for SubP appears.

This is wrong for Ada(95).

In Ada you can read out parameter, and this program is then not valid.
It's behavior is unknown.

>If you change op to an "in out" parameter, you'll be reading an
>uninitialized variable, but typically neither the compiler nor the
>runtime will complain.

>                                -- Adam

Pascal.


--|------------------------------------------------------------
--| Pascal Obry                               Team-Ada Member |
--|                                                           |
--| EDF-DER-IPN-SID- Ing�nierie des Syst�mes d'Informations   |
--|                                                           |
--| Bureau G1-010           e-mail: pascal.obry@der.edfgdf.fr |
--| 1 Av G�n�ral de Gaulle  voice : +33-1-47.65.50.91         |
--| 92141 Clamart CEDEX     fax   : +33-1-47.65.50.07         |
--| FRANCE                                                    |
--|------------------------------------------------------------
--|
--|   http://ourworld.compuserve.com/homepages/pascal_obry
--|
--|   "The best way to travel is by means of imagination"

Re: Uninitialized "out" parameters

[Peter Hermann]

Pascal Obry (pascal.obry@der.edfgdf.fr) wrote:
: > >  procedure SubP (op : out Integer) is
: > >  begin
: > >    op := op+1;
: In Ada you can read out parameter, and this program is then not valid.
: It's behavior is unknown.

even more frightening
Tuck?

--
Peter Hermann  Tel:+49-711-685-3611 Fax:3758 ph@csv.ica.uni-stuttgart.de
Pfaffenwaldring 27, 70569 Stuttgart Uni Computeranwendungen
Team Ada: "C'mon people let the world begin" (Paul McCartney)

Re: Uninitialized "out" parameters

[Samuel Tardieu]

Pascal> In Ada you can read out parameter, and this program is then
Pascal> not valid. It's behavior is unknown.

Peter> even more frightening Tuck?

I don't see what's frightening here. As I understand it, this point
has been introduced to allow things like this:

  procedure Fact (N : in Positive; R : out Positive) is
  begin
     R := 1;
     for I in 2 .. N loop
        R := R * I;       --  Note that the R out parameter gets read here
     end loop;
  end Fact;

If you forget to initialize R, then it's your fault and the compiler
may warn you as it may do for other uninitialized variables...

  Sam
-- 
"La cervelle des petits enfants, ca doit avoir comme un petit gout de noisette"
                                                       Charles Baudelaire

Re: Uninitialized "out" parameters

[John Herro]

Samuel Tardieu <sam@inf.enst.fr> writes that Ada 95
allows reading of "out" parameters to allow things like:
>  procedure Fact (N : in Positive; R : out Positive) is
>  begin
>     R := 1;
>     for I in 2 .. N loop
>        R := R * I;       --  Note that the R out parameter gets read
here
>     end loop;
>  end Fact;

     Yes, but this saves us only one variable declaration and one line in
the executable region over the way it would be done in Ada 83:

procedure Fact (N : in Positive; R : out Positive) is
   S : Positive;  -- new
begin
   S := 1;
   for I in 2 .. N loop
      S := S * I;
   end loop;
   R := S;  -- new
end Fact;

- John Herro
Software Innovations Technology
http://members.aol.com/AdaTutor
ftp://members.aol.com/AdaTutor

Re: Uninitialized "out" parameters

[Tucker Taft]

John Herro (johnherro@aol.com) wrote:
: Samuel Tardieu <sam@inf.enst.fr> writes that Ada 95
: allows reading of "out" parameters to allow things like:
: >  procedure Fact (N : in Positive; R : out Positive) is
: >  begin
: >     R := 1;
: >     for I in 2 .. N loop
: >        R := R * I;       --  Note that the R out parameter gets read
: here
: >     end loop;
: >  end Fact;

:      Yes, but this saves us only one variable declaration and one line in
: the executable region over the way it would be done in Ada 83:

: procedure Fact (N : in Positive; R : out Positive) is
:    S : Positive;  -- new
: begin
:    S := 1;
:    for I in 2 .. N loop
:       S := S * I;
:    end loop;
:    R := S;  -- new
: end Fact;

It is hard to know which error is more common, the Ada 83
one where you create a local read/write variable and then forget to 
assign it on all exit paths to the OUT parameter, or the Ada 95
one where you forget to initialize the read/write OUT parameter.

Having experienced the Ada 83 situation for 10 years, I remember
having made the Ada 83 error several times.  It is too early to tell
how it will compare in frequency to the Ada 95 error.

The main advantage is that it simplifies the language, since
you only have one rule -- initialize your variables -- rather than
two.  Ada 83's unreadable OUT parameters require a special
paradigm, and introduce a second class of errors, when you need
to build up an answer incrementally.

: - John Herro
: Software Innovations Technology
: http://members.aol.com/AdaTutor
: ftp://members.aol.com/AdaTutor

-Tucker Taft   stt@inmet.com   http://www.inmet.com/~stt/
Intermetrics, Inc.  Cambridge, MA  USA

Re: Uninitialized "out" parameters

[Peter Hermann]

Tucker Taft (stt@henning.camb.inmet.com) wrote:
: It is hard to know which error is more common, the Ada 83
: one where you create a local read/write variable and then forget to 
: assign it on all exit paths to the OUT parameter, or the Ada 95
: one where you forget to initialize the read/write OUT parameter.

: Having experienced the Ada 83 situation for 10 years, I remember
: having made the Ada 83 error several times.  It is too early to tell

me too ... and then quickly changing to John Herro's solution.
(while grumbling ;-)

: how it will compare in frequency to the Ada 95 error.

: The main advantage is that it simplifies the language, since
: you only have one rule -- initialize your variables -- rather than
: two.  Ada 83's unreadable OUT parameters require a special
: paradigm, and introduce a second class of errors, when you need
: to build up an answer incrementally.

For the Ada83 class of errors I ask you for an example.

I consider the current Ada95 rule a true source of errors
and therefore a nasty property of the language.
I could imagine an Ada2005 where the compiler is obliged to only
allow any downstream reading of mode-"OUT"-parameters 
when the context clearly indicates a prior setting,
whatever flow of control was taken before.

BTW, under NO circumstances I would accept an incoming value of 
a formal OUT parameter as data to be processed. I am sure you all agree.

I am not satisfied with the language concerning
the handling of non-initialized variables in general.
This has been discussed long time ago. 
I remember e.g. the efficiency aspect.

--
Peter Hermann  Tel:+49-711-685-3611 Fax:3758 ph@csv.ica.uni-stuttgart.de
Pfaffenwaldring 27, 70569 Stuttgart Uni Computeranwendungen
Team Ada: "C'mon people let the world begin" (Paul McCartney)

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <4t20tb$1bum@info4.rus.uni-stuttgart.de>,
Peter Hermann <ica2ph@alpha1.csv.ica.uni-stuttgart.de> wrote:
>For the Ada83 class of errors I ask you for an example.

I gave such an example in a previous post.  You have to build up the
result in a local variable, and the possible bug is that you forget to
assign the local into the 'out' parameter.  This is at least as likely
as the potential bug prevented in Ada 83, which is where you read the
'out' param before initializing it.

>I consider the current Ada95 rule a true source of errors
>and therefore a nasty property of the language.

As explained above, the Ada 83 rule is *also* a true source of errors.
The only real solution is to have a comprehensive rule for detecting
uninitialized vars, either at run time or compile time (or both).

>I could imagine an Ada2005 where the compiler is obliged to only
>allow any downstream reading of mode-"OUT"-parameters 
>when the context clearly indicates a prior setting,
>whatever flow of control was taken before.

The problem isn't OUT params in particular.  The problem is uninit vars.
If Ada 05 is to solve the problem, it ought to do so in a uniform manner
for all variables, not just OUT parameters.

>BTW, under NO circumstances I would accept an incoming value of 
>a formal OUT parameter as data to be processed. I am sure you all agree.

Well, I'll bet you accept incoming discriminants and array bounds.
Other than those, I agree.

>I am not satisfied with the language concerning
>the handling of non-initialized variables in general.

Agreed.

>This has been discussed long time ago. 
>I remember e.g. the efficiency aspect.

And agreed.

- Bob

Re: Uninitialized "out" parameters

[Dale Stanbrough]

Adam Beneschan writes:
"Well, you can't read an "out" parameter at all, so it's illegal to use
 "op" in the right-hand side of your assignment.  So the compiler
 should give you an error.  Also, in Ada83, you'll get an error because
 I needs to be declared before the code for SubP appears.
 
 If you change op to an "in out" parameter, you'll be reading an
 uninitialized variable, but typically neither the compiler nor the
 runtime will complain."
 
 
Ada95 does allow you to read out parameters. The code written simply
uses an uninitialized variable, and I would imagine it would be declared
erroneous by the LRM.

Dale

Re: Uninitialized "out" parameters

[Adam Beneschan]

Dale Stanbrough <dale@goanna.cs.rmit.edu.au> writes:
 
 >Adam Beneschan writes:
 >"Well, you can't read an "out" parameter at all, so it's illegal to use
 > "op" in the right-hand side of your assignment.  So the compiler
 > should give you an error.  Also, in Ada83, you'll get an error because
 > I needs to be declared before the code for SubP appears.
 > 
 > If you change op to an "in out" parameter, you'll be reading an
 > uninitialized variable, but typically neither the compiler nor the
 > runtime will complain."
 > 
 > 
 >Ada95 does allow you to read out parameters. The code written simply
 >uses an uninitialized variable, and I would imagine it would be declared
 >erroneous by the LRM.

Sorry, I wasn't aware of this change.

This rule change frightens me a little.  In the posted example:

   procedure SubP (op : out integer) is
   begin
      op := op + 1;
   end SubP;

I've been known to accidentally type "out" when I mean "in out".  In
Ada 83, the compiler would catch me, but now it won't, and the effect
will be very different because here the "op" on the right side of the
assignment is always uninitialized.  However, I guess a smart compiler
would let me know that I'm using an uninitialized parameter, and
perhaps the advantages of letting you read an OUT parameter after
you've written to it outweigh this disadvantage.

                                -- Adam

Re: Uninitialized "out" parameters

[James A. Squire]

Adam Beneschan wrote:
>
> Dale Stanbrough <dale@goanna.cs.rmit.edu.au> writes:
>
>  >Adam Beneschan writes:
>  >"Well, you can't read an "out" parameter at all, so it's illegal to use
>  > "op" in the right-hand side of your assignment.  So the compiler
>  > should give you an error.  Also, in Ada83, you'll get an error because
>  > I needs to be declared before the code for SubP appears.
>  >
>  > If you change op to an "in out" parameter, you'll be reading an
>  > uninitialized variable, but typically neither the compiler nor the
>  > runtime will complain."
>  >
>  >
>  >Ada95 does allow you to read out parameters. The code written simply
>  >uses an uninitialized variable, and I would imagine it would be declared
>  >erroneous by the LRM.
>
> Sorry, I wasn't aware of this change.
>
> This rule change frightens me a little.  In the posted example:
>
>    procedure SubP (op : out integer) is
>    begin
>       op := op + 1;
>    end SubP;
>
> I've been known to accidentally type "out" when I mean "in out".  In
> Ada 83, the compiler would catch me, but now it won't, and the effect
> will be very different because here the "op" on the right side of the
> assignment is always uninitialized.  However, I guess a smart compiler
> would let me know that I'm using an uninitialized parameter, and
> perhaps the advantages of letting you read an OUT parameter after
> you've written to it outweigh this disadvantage.

I tried to find out from the LRM if this compiler behavior is required,
but I don't see it anywher in chapter 6.  I do know that in 6.1.1 of the
Ada95 Rationale, it has the following paragraph:

"For Ada 95, we have removed the restrictions on the use of out
parameters.  Specifying that a formal parameter is of mode out indicates
that the caller need not initialize it prior to the call. However,
within the procedure, once the
                                                                    ^^^^^^^^
parameter has been initialized, it may be read and updated like any
other
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
variable. As with a normal variable, it is an error to depend on the
value of an out parameter prior to its being initialized."

but I don't know if that's a compiler error or a run-time error.  From
the context, I'd guess a run-time error.
--
James Squire                             mailto:ja_squire@csehp3.mdc.com
MDA Avionics Tools & Processes
McDonnell Douglas Aerospace              http://www.mdc.com/
Opinions expressed here are my own and NOT my company's
"Nice shark...pretty shark..."
        -- Londo, "The Gathering"

Re: Uninitialized "out" parameters

[Adam Beneschan]

"James A. Squire" <m193884@CSEHP3.MDC.COM> writes:
 >Adam Beneschan wrote:
 >>
 >> This rule change frightens me a little.  In the posted example:
 >>
 >>    procedure SubP (op : out integer) is
 >>    begin
 >>       op := op + 1;
 >>    end SubP;
 >>
 >> I've been known to accidentally type "out" when I mean "in out".  In
 >> Ada 83, the compiler would catch me, but now it won't, and the effect
 >> will be very different because here the "op" on the right side of the
 >> assignment is always uninitialized.  However, I guess a smart compiler
 >> would let me know that I'm using an uninitialized parameter, and
 >> perhaps the advantages of letting you read an OUT parameter after
 >> you've written to it outweigh this disadvantage.
 >
 >I tried to find out from the LRM if this compiler behavior is required,
 >but I don't see it anywher in chapter 6.  
 
I'm not sure what you're referring to by "this" compiler
behavior--whether you mean that it treats "op" as uninitialized, or
whether you're referring to giving a warning about using an
uninitialized parameter.  The first is covered by 6.4.1(12-15):

"For an out parameter that is passed by copy, the format parameter
object is created, and:  . . ."

"For any other type [besides access types and certain composite
types], the formal parameter is uninitialized. . . ."

 >I do know that in 6.1.1 of the
 >Ada95 Rationale, it has the following paragraph:
 >
 >"For Ada 95, we have removed the restrictions on the use of out
 >parameters.  Specifying that a formal parameter is of mode out indicates
 >that the caller need not initialize it prior to the call. However,
 >within the procedure, once the
 >                                                                    ^^^^^^^^
 >parameter has been initialized, it may be read and updated like any
 >other
 >^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 >variable. As with a normal variable, it is an error to depend on the
 >value of an out parameter prior to its being initialized."
 >
 >but I don't know if that's a compiler error or a run-time error.  From
 >the context, I'd guess a run-time error.

I'd guess it's the same as for any uninitialized object, which is a
bounded error that most likely won't be caught.

                                -- Adam

Re: Uninitialized "out" parameters

[Michael Feldman]

In article <31EF9DFC.6FB4@csehp3.mdc.com>,
James A. Squire <m193884@CSEHP3.MDC.COM> wrote:

[quoting the Rationale]
>variable. As with a normal variable, it is an error to depend on the
>value of an out parameter prior to its being initialized."

then commenting:
>
>but I don't know if that's a compiler error or a run-time error.  From
>the context, I'd guess a run-time error.

It _cannot_ be a compiler error, because in general it is undecidable
whether a variable is used before it is initialized. A friendly compiler
can give a compilation _warning_.

Now, will it be a runtime error?  That is, will it cause an exception to
be raised? Maybe. This is a special case - as the Rationale mentioned -
of an ordinary uninitialized variable. We must assume that an uninitialized
variable has an arbitrary value, which may or may not be in range.

We've had recurring threads on this issue in this newsgroup.
That the uninitialized object happens to be an OUT parameter doesn;t
change anything.

Mike Feldman

Re: Uninitialized "out" parameters

[Fergus Henderson]

mfeldman@seas.gwu.edu (Michael Feldman) writes:

>It _cannot_ be a compiler error, because in general it is undecidable
>whether a variable is used before it is initialized.

Sure it could be a compiler error.  I know of at least one language
for which that is the case, and there are probably others.
(I'm not sure, but Java may be one of them?)

Note that type correctness (defined in the dynamic sense) is also
undecidable -- yet there are certainly *lots* of languages for which
the compiler enforces type safety at compile time.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Michael Feldman]

In article <4ssn9r$p6e@mulga.cs.mu.OZ.AU>,
Fergus Henderson <fjh@mundook.cs.mu.OZ.AU> wrote:
>mfeldman@seas.gwu.edu (Michael Feldman) writes:
>
>>It _cannot_ be a compiler error, because in general it is undecidable
>>whether a variable is used before it is initialized.
>
>Sure it could be a compiler error.  I know of at least one language
>for which that is the case, and there are probably others.
>(I'm not sure, but Java may be one of them?)

I'm not sure about Java either, but you quoted me out of context; we
were talking about Ada, in which there is no _required_ initialization
of variables. In that context, my statement is correct.

If the language rules required that each variable must be initialized
at elaboration (say, either by an initialization expression or by
default using some value within the type of that variable), then
there would be no uninitialized-variable problem because all variables 
were guaranteed to be initialized.
>
>Note that type correctness (defined in the dynamic sense) is also
>undecidable -- yet there are certainly *lots* of languages for which
>the compiler enforces type safety at compile time.

That is a different issue. If Ada _compelled_ initialization, it would be
trivial to determine whether all variables were initialized. Certainly the
compiler could "enforce" initialization; if you failed to supply an
initializer, the compiler would supply a default. There have been
earlier threads on why Ada does not compel initialization.

This is NOT what we were talking about. The thread was about Ada as 
it is, not as we might like it to be. Given that Ada does _not_ compel
initialization, it is undeciable for a compiler to catch all cases
of use-before-initialize. Some trivial cases can be caught; others
can be warned as "_might_ be used before initialization".

Consider a trivial case:

  X: Integer;
  Y: Character;

begin

  get(Y);
  if Y = 'a' then
    X := -3274;
  else
    code not involving X
  end if;
  put(X);

What should the compiler do here? _Maybe_ X will be used before
initialization. We cannot know with confidence whether it _will_ be.

Does Java _compel_ initialization? Which languages do, in your experience?

Mike Feldman

Re: Uninitialized "out" parameters

[Robert Dewar]

Mike said

"That is a different issue. If Ada _compelled_ initialization, it would be
trivial to determine whether all variables were initialized. Certainly the
compiler could "enforce" initialization; if you failed to supply an
initializer, the compiler would supply a default. There have been
earlier threads on why Ada does not compel initialization."

No, that's not quite right, there are other ways for the value of a variable
to become abnormal, and therefore not guaranteed to be set to a known value.
OK, this is not quite the same as never having been initialized, but from
a practical point of view, it is the same from the programmer's point of  view,
namely you have a variable which you better not reference, and it is 
undecidable whether a given reference runs into trouble with such an
abnormal value. Some ways in which values can become abnormal are through
the occurrence of an exception during an assignment, through asynchrnonous
interruption of a task (via abort or ATC), or via a bad unchecked conversion.

Re: Uninitialized "out" parameters

[Fergus Henderson]

mfeldman@seas.gwu.edu (Michael Feldman) writes:

>Fergus Henderson <fjh@mundook.cs.mu.OZ.AU> wrote:
>>mfeldman@seas.gwu.edu (Michael Feldman) writes:
>>
>>>It _cannot_ be a compiler error, because in general it is undecidable
>>>whether a variable is used before it is initialized.
>>
>>Sure it could be a compiler error.
>
>[...] you quoted me out of context; we
>were talking about Ada, in which there is no _required_ initialization
>of variables. In that context, my statement is correct. [...]
>The thread was about Ada as it is, not as we might like it to be.

Threads do have a habit of shifting topics.  When you started talking
about what "cannot be", and referred to undecidability to justify your
point, rather than referring to the RM, it seemed to me that you were
talking about what is or is not logically possible, rather than what
happens to be the case.  I seem to have misinterpreted you, so my
apologies.

>Consider a trivial case:
>
>  X: Integer;
>  Y: Character;
>
>begin
>
>  get(Y);
>  if Y = 'a' then
>    X := -3274;
>  else
>    code not involving X
>  end if;
>  put(X);
>
>What should the compiler do here? _Maybe_ X will be used before
>initialization. We cannot know with confidence whether it _will_ be.

If you're talking about Ada-as-it-is, then the compiler should issue a
warning, but accept the code.  It should do the same thing even for
a code fragment such as

	    X: Integer;
	  begin
	    put(X);

unless it can prove that this code fragment will be executed.

If you're talking about Ada-as-it-should-be, then the question is
more debatable.  I think it is a good idea for compilers to warn
about such constructs, and a good idea for programmers to always
restructure their code to avoid such warnings.  If you accept that,
it's only a short step from there to agreeing that these messages
should be errors rather than warnings.

If you transliterate that example from Ada to Mercury, and try
compiling the resuling code, the Mercury compiler will report an error
"mode mismatch in if-then-else", and will tell you that `X' is bound in
one branch of the if-then-else, but not in the other.

>Does Java _compel_ initialization?

My copy of the Java language specification is elsewhere at the moment,
and I don't have a Java compiler at hand to test, so there is a quite
large chance that I may be wrong about this, but I _think_ that
Java does not require initialization at the point of declaration,
but instead requires that a variable be initialized along all the
execution paths leading to a possible use of a that variable;
that would mean that if a variable wasn't used, there would be
no requirement to initialize it.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Michael Feldman]

In article <4svba5$j2i@mulga.cs.mu.OZ.AU>,
Fergus Henderson <fjh@mundook.cs.mu.OZ.AU> wrote:

>Threads do have a habit of shifting topics.  When you started talking
>about what "cannot be", and referred to undecidability to justify your
>point, rather than referring to the RM, it seemed to me that you were
>talking about what is or is not logically possible, rather than what
>happens to be the case.  I seem to have misinterpreted you, so my
>apologies.

OK. I think the essence of the discussion is that in a language
(like Ada) that does not compel initialization, it is undecidable
whether a given variable has a well-defined (put there by the program)
value when it is used.
>
>If you're talking about Ada-as-it-is, then the compiler should issue a
>warning, but accept the code.  It should do the same thing even for
>a code fragment such as
>
>	    X: Integer;
>	  begin
>	    put(X);
>
>unless it can prove that this code fragment will be executed.

Indeed. A compiler should give a warning, and in my experience, does,
if it can make a reasonably good guess. Some compilers (I think)
provide a compile-time flag that the programmer wants to treat warnings 
as though they were fatal errors. I don;t see anything in gnatinfo to
suggest that GNAT does this, though.
>
>If you're talking about Ada-as-it-should-be, then the question is
>more debatable.  I think it is a good idea for compilers to warn
>about such constructs, and a good idea for programmers to always
>restructure their code to avoid such warnings.  If you accept that,
>it's only a short step from there to agreeing that these messages
>should be errors rather than warnings.

"Error" vs. "warning" is a bit arbitrary; I think it's really kind
of religious. We're talking Ada-as-it-should-be here. For example,
a friendly Ada-as-it-is compiler will give a warning if, say, it _knows_
that Constraint_Error will be raised. This cannot legally be an error,
and in fact, there are cases where the programmer _wants_ to force an
exception in an obvious way (say, to test his exception-handling code!).

So the programmer really should have the choice of handling here.
The treat-warnings-as-fatal flag would do this. Sure, we could take
a religious position that the _default_ should be a fatal error;
that would not bother me at all.
>
>If you transliterate that example from Ada to Mercury, and try
>compiling the resuling code, the Mercury compiler will report an error
>"mode mismatch in if-then-else", and will tell you that `X' is bound in
>one branch of the if-then-else, but not in the other.

So Mercury is producing an error where Ada would produce a warning.
As I said, I think this is just a matter of taste.
>
>>Does Java _compel_ initialization?
>
>My copy of the Java language specification is elsewhere at the moment,
>and I don't have a Java compiler at hand to test, so there is a quite
>large chance that I may be wrong about this, but I _think_ that
>Java does not require initialization at the point of declaration,
>but instead requires that a variable be initialized along all the
>execution paths leading to a possible use of a that variable;
>that would mean that if a variable wasn't used, there would be
>no requirement to initialize it.

And if it _was_ used? How does the JBC interpreter know whether it's 
been initialized? Possibly in the interpreter, there's a "this space 
is uninitialized" flag. As I recall, there have even been such bits
in certain hardware architectures. But the "undecidability" issue
was referring to the _general_ platform case for Ada-as-it-is.

Mike Feldman

Re: Uninitialized "out" parameters

[Robert Dewar]

Mike said

  "Indeed. A compiler should give a warning, and in my experience, does,
  if it can make a reasonably good guess. Some compilers (I think)
  provide a compile-time flag that the programmer wants to treat warnings
  as though they were fatal errors. I don;t see anything in gnatinfo to
  suggest that GNAT does this, though."

Mike, remember that GNAT is part of gcc, *all* the usual gcc options apply,
as documented in the gcc manual. The following is from gnatinfo.txt:

  In the usual procedures for using GNAT, Ada source programs are compiled into
  object files using the driver program 'gcc' with the option '-c' (compile
  only). Gcc recognizes the ada filename extensions .ads and .adb (discussed
  more thoroughly below) and calls the actual compiler, 'gnat1' to compile the
  source file.  Gcc has many switches explained in your gcc documentation.  In
  addition, gcc passes certain switches to gnat1.  These (with a couple of
  exceptional abbreviations) are spelled on the gcc command line by "-gnatXXX".

In "your gcc documentation" you will find the switch -Wuninitialized, which,
used together with -O, causes gcc to give warnings for uninitialized
variables. The GNAT frontend also catches some cases itself.

Re: Uninitialized "out" parameters

[Fergus Henderson]

dewar@cs.nyu.edu (Robert Dewar) writes:

>Mike said
>
>  "Indeed. A compiler should give a warning, and in my experience, does,
>  if it can make a reasonably good guess. Some compilers (I think)
>  provide a compile-time flag that the programmer wants to treat warnings
>  as though they were fatal errors. I don;t see anything in gnatinfo to
>  suggest that GNAT does this, though."
>
>Mike, remember that GNAT is part of gcc, *all* the usual gcc options apply,
>as documented in the gcc manual.
[...]
>In "your gcc documentation" you will find the switch -Wuninitialized, which,
>used together with -O, causes gcc to give warnings for uninitialized
>variables. The GNAT frontend also catches some cases itself.

I think Mike was looking for gcc's `-Werror' option, which makes it
treat warnings as errors.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Fergus Henderson]

mfeldman@seas.gwu.edu (Michael Feldman) writes:

>I think the essence of the discussion is that in a language
>(like Ada) that does not compel initialization, it is undecidable
>whether a given variable has a well-defined (put there by the program)
>value when it is used.

Yes, but remember that if you're willing to accept approximate
solutions, you can solve undecidable problems.

>>[...] I _think_ that
>>Java does not require initialization at the point of declaration,
>>but instead requires that a variable be initialized along all the
>>execution paths leading to a possible use of a that variable;
>>that would mean that if a variable wasn't used, there would be
>>no requirement to initialize it.
>
>And if it _was_ used? How does the JBC interpreter know whether it's 
>been initialized? Possibly in the interpreter, there's a "this space 
>is uninitialized" flag.

I believe that it is done by static checking, not by run-time
checking.  (I think the static checking is done twice, once by the Java
compiler, and then again by the byte-code verifier in the JBC
interpreter when it first loads the JBC code.)

I don't know how Java handles arrays.  But I'm sure there are lots
of Java experts in comp.lang.java.* that would be happy to answer
such questions.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Robert A Duff]

There's a lot of stuff about warnings in this thread.

With regard to uninit vars, the compiler can categorize each variable
reference as one of (1) correct, (2) wrong, or (3) don't know.  A goal,
of course, is to make the compiler as smart as possible, so the
likelihood of category (3) is as small as possible.  The halting theorem
tells we can't shrink (3) to zero (given the rules of Ada).

Clearly, the compiler should warn for (2), not warn for (1).  But what
should it do for (3)?  False warnings can be such a big pain as to make
all the warnings useless.  I don't want to clutter my code with useless
initializations, in cases where I'm smart enough to prove it, but the
compiler isn't.  My experience is that most compilers leave a *lot* of
cases in category (3).  Opinions?

- Bob

Re: Uninitialized "out" parameters

[Richard A. O'Keefe]

bobduff@world.std.com (Robert A Duff) writes:
>With regard to uninit vars, the compiler can categorize each variable
>reference as one of (1) correct, (2) wrong, or (3) don't know.

>Clearly, the compiler should warn for (2), not warn for (1).  But what
>should it do for (3)?

Leave it to the programmer.  Let it be Options|Compiler|PossibleUninit|On
or whatever.  At least make it _available_.

For what it's worth, whenever Lint has given me a bogus warning, the code
in question has been so warped that it has warranted a rewrite anyway.
The same goes double with lclint.  If you really truly believe that
programs should be written to be maintainable, then the slogan
"not no obvious errors, but obviously no errors" means that it shouldn't
be hard for a programmer or a compiler to see that the code is right.
That means treating "I can't tell whether this is initialised or not"
messages as warnings that the code is hard to understand.

Both lint and lclint offer the choice of
 - globally suppressing such messages from the command line
 - locally annotating a fragment of code to say that a certain
   warning should be suppressed (in fact, lclint will, if asked,
   warning if the expected number of warnings _isn't_ suppressed,
   so that suppressions obsoleted by code changes don't go unnoticed).
The latter leaves a visible warning to maintainers in the source code:
"something funny is going on here, but trust me".

-- 
Fifty years of programming language research, and we end up with C++ ???
Richard A. O'Keefe; http://www.cs.rmit.edu.au/~ok; RMIT Comp.Sci.

Re: Uninitialized "out" parameters

[Robert Dewar]

Paul asked

"In the following Ada program, should either the compiler or the run-time
get some kind of error because the out parameter is not initialized?

procedure Testit is

  procedure SubP (op : out Integer) is
  begin
    op := op+1;
  end SubP;

  I : Integer;

begin
  SubP (I);
end Testit;



The answer is that this program is perfectly legal, so it would be incorrect
for a compiler to reject it. At execution time, if subp is called, then the
addition operation references an uninitialized variable and renders the
program execution erroneous, which means anything might happen, but you
certainly cannot expect/require a runtime error. The execution might raise
Program_Error, but it also might do anything else.

A compiler could give a warning for this program. For example, GNAT, using
the option -Wuninitialized (warn on uninitialized variable use), gives

testit.adb: In function `subp':
testit.adb:3: warning: `op' might be used uninitialized in this function

But certainly it is impossible for a compiler to give warnings in all
cases of uninitialized variable use.

Re: Uninitialized "out" parameters

[Peter Amey]

On 18 Jul 1996, Robert Dewar wrote:
[snip]
> 
> But certainly it is impossible for a compiler to give warnings in all
> cases of uninitialized variable use.
> 

True, but high-integrity tools like the SPARK Examiner can and do; they 
also turn out to be a rich source of errors in real programs.

Peter

Re: Uninitialized "out" parameters

[Fergus Henderson]

dewar@cs.nyu.edu (Robert Dewar) writes:

>But certainly it is impossible for a compiler to give warnings in all
>cases of uninitialized variable use.

No, certainly it is possible.  There are languages in which any code
that might attempt to use an uninitialized variable is a compile-time
error.  It would certainly be possible for an Ada compiler to give
warnings in all cases where a variable might be used before it was
initialized.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Robert Dewar]

Fergus said

"No, certainly it is possible.  There are languages in which any code
that might attempt to use an uninitialized variable is a compile-time
error.  It would certainly be possible for an Ada compiler to give
warnings in all cases where a variable might be used before it was
initialized."

Well it depends what you mean. If we read what you say literally, it is
obviously incorrect, since it requires the halting problem to be solved:

    procedure x is
        m,n : integer;
    begin
       (big chunk of code not referencing m,n)
       m := n;
    end;

this code references the uninitialized variable n if and only if the big
chunk of code halts. That's an easy proof.

If you don't mind getting bogus warnings, i.e. warnings that might be
false, then your statement is trivially true, just post a warning on
every use (of course your compiler might be more clever than this, but
this is again a simple proof.

Re: Uninitialized "out" parameters

[Fergus Henderson]

dewar@cs.nyu.edu (Robert Dewar) writes:

>Fergus said
>
>"No, certainly it is possible.  There are languages in which any code
>that might attempt to use an uninitialized variable is a compile-time
>error.  It would certainly be possible for an Ada compiler to give
>warnings in all cases where a variable might be used before it was
>initialized."
>
>Well it depends what you mean. If we read what you say literally, it is
>obviously incorrect, since it requires the halting problem to be solved:

No, if you read it literally, it's correct -- but you're not reading it
literally, you're reading into it more than what I wrote.

>If you don't mind getting bogus warnings, i.e. warnings that might be
>false, then your statement is trivially true,

Yes.  I never said anything about not getting some spurious warnings
(or spurious errors).

Presuming the spurious warnings/errors don't occur often, and so long
as there are easy work-arounds when they do occur, I don't think that
would be a major problem.  Certainly programmers have demonstrated
a willingness to accept that sort of thing in other aspect of
programming languages (e.g. type systems).

>    procedure x is
>        m,n : integer;
>    begin
>       (big chunk of code not referencing m,n)
>       m := n;
>    end;
>
>this code references the uninitialized variable n if and only if the big
>chunk of code halts. That's an easy proof.

Similarly, in a dynamically typed Ada-like language, the code

    procedure x is
        m : integer;
        n : some_other_type;
    begin
       (big chunk of code)
       m := n;
    end;

causes a run-time type error if and only if the big chunk of code halts.
Of course, Ada uses static type checking, rather than dynamic typing;
they report some "spurious" type errors such as for the example above.

There's no reason why Ada compilers couldn't do the analagous sort of
thing for uninitialized variables.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Robert Dewar]

Fergus said

"Similarly, in a dynamically typed Ada-like language, the code

    procedure x is
        m : integer;
        n : some_other_type;
    begin
       (big chunk of code)
       m := n;
    end;

causes a run-time type error if and only if the big chunk of code halts.
Of course, Ada uses static type checking, rather than dynamic typing;
they report some "spurious" type errors such as for the example above.

There's no reason why Ada compilers couldn't do the analagous sort of
thing for uninitialized variables."

Yes, but Ada is not dyunamically typed, it uses a decidable static type
system, and there are VERY good reasons why comparable static systems
cannot be designed for dealing with the uninitialized variable problem
(please reread carefully my example of the 2 gig array in an allocate
on demand environment -- and response to how your decidable system
would accomodate this requirement).
\x1adp

Re: Uninitialized "out" parameters

[Richard A. O'Keefe]

dewar@cs.nyu.edu (Robert Dewar) writes:
>Yes, but Ada is not dyunamically typed, it uses a decidable static type
>system, and there are VERY good reasons why comparable static systems
>cannot be designed for dealing with the uninitialized variable problem
>(please reread carefully my example of the 2 gig array in an allocate
>on demand environment -- and response to how your decidable system
>would accomodate this requirement).

In my experience of marking student C programs, trying to use uninitialised
variables is the commonest non-syntactic error.  I have found the program
'lclint' _extremely_ useful when marking because it does a very good job of
noticing possible uninitialised variables.  It even manages on occasion to
do a useful (not perfect) job with arrays.  On one student program it
reported 62 such warnings, and I thought it was crying wolf, but on closer
inspection every single warning (most of the involving arrays) was right.

I note that SPARCompiler Pascal, which I do not otherwise care for, has
a "-Rw" command line option for extending uninitialised variable tracking
into records (but not arrays).

Over the last year I have been coming to the conclusion that the ability to
use uninitialised variables is one of those programming language features
that I am better off without.  I mean, ever since "A Discipline of
Programming" I thought it was a good idea, but I also thought I was a hot
enough programmer not to need such a crutch.

Then I started using lclint, and it started finding mistakes that I hadn't
noticed.

True, Ada is so designed that sound and complete compile-time detection
of using uninitialised variables is impossible ('separate' probably
contributes something to this).  It's also worth noting that the change
to 'out' parameters in Ada 95 doesn't make it noticably harder for a
compiler that *tries* to do a *useful* amount of checking, as for example
gcc -O2 -Wall does.

But some day Ada will have a successor.  And I can see no reason why that
successor should not do a better job than Ada in this respect.

I mentioned lclint.  lclint does something rather interesting:  it tracks
the allocation state of pointers, via annotations.  In effect, it uses a
richer type language than C, in which it is possible to express things
like "this is a non-null pointer to an object having no other pointers";
just as Dijkstra's notation tracks "obligation to initialise" in the
type system, so lclint tracks "obligation to free" in the type system.

Fergus Henderson has posted in this thread.  He's involved in the
Mercury project, and Mercury, in addition to "types" uses something
called "modes" which in effect enrich the type system so that the
programmer can say
	"this procedure takes a record in which the x and y fields
	 are initialised and the z and w fields aren't, and
	 initialises the w field"
and the compiler can *prove* at compile time that no uninitialised
variable access is possible.

There has been other work done on including state and effects in type
systems, but lclint and Mercury are practical tools you can FTP today.

In the short term, the array problem can be handled the way Dijkstra's
notation does:  by having dynamic bounds, so that the initialised part
of an array is the part within the dynamic bounds, and the rest of the
array acts as if it didn't exist.  SPARCompiler Pascal has
	varying [n] of char
as its type for strings; this is the same idea as Dijkstra's arrays
except that the lower bound is frozen at 1.  Such a string may have
*room* for 100000 characters, but if it was last assigned a string of
5 characters, those 5 are the only ones you can access.

What does that mean for Ada?  It means that the use of abstract container
types like queues and APL/Fortran-90/Torrix-style "whole array" operations
are not just a clearer way to say what you mean, they are a good way to
avoid a class of errors.

-- 
Fifty years of programming language research, and we end up with C++ ???
Richard A. O'Keefe; http://www.cs.rmit.edu.au/~ok; RMIT Comp.Sci.

Re: Uninitialized "out" parameters

[Robert Dewar]

Richard said

  True, Ada is so designed that sound and complete compile-time detection
  of using uninitialised variables is impossible.

  But some day Ada will have a successor.  And I can see no reason why that
  successor should not do a better job than Ada in this respect.

I doubt it, you certainly do not suggest what that better job might be. The
rest of your note talks about checking that is not and cannot be completely
statically reliable. As for practical tools, any good Ada compiler should
indeed warn of many common cases, and tools analogous to lclint are
perfectly possible with Ada, and/or should be built into the Ada compiler.

Dynamic bounds of arrays do not help in compile time legality checking, so
I don't see what relevance they have. And yes, container types are certainly
appropriate (after all see Bounded_String, which is exactly what you are
talking about), but again, this has nothing to do with compile time legality
requirements.

Let's try to focus a specific example, the one I gave before, and you tell
me how your improved approach will work at compile time to detect as
illegalities all references to uninitialized elements.

I have an array of 2 gigabytes in an allocate-on-demand environment. I use
this as a sparse hash table, but it is critical that only pages that are
actually used get referenced, so it is out of the question to initialize
the table.

How do I make sure that references to this array correspond to previously
set elements? Even doing this at runtime is awkward, but I see no way of
designing a type system or any other semantic framework to solve this at
compile time as a legality issue.

It is not good enough to just say "we should do better", you have to say
*exactly* how you can do better, or your position is unconvincing. After
all, this is an old problem that has not been solved for 38 years now
(I am counting from Algol-58, it is a bit longer if you count from the
first Fortran), so if you have a solution, it would be nice to present it!

Re: Uninitialized "out" parameters

[Fergus Henderson]

dewar@cs.nyu.edu (Robert Dewar) writes:

>Richard said
>
>  True, Ada is so designed that sound and complete compile-time detection
>  of using uninitialised variables is impossible.
>
>  But some day Ada will have a successor.  And I can see no reason why that
>  successor should not do a better job than Ada in this respect.
>
>I doubt it, you certainly do not suggest what that better job might be. The
>rest of your note talks about checking that is not and cannot be completely
>statically reliable.

I disagree.  You keep saying that static checking cannot be completely
reliable, but this is wrong -- you _can_ get reliable static checking.
The down side is that in order to get it, you might have to accept some
loss of expressiveness -- but you _can_ get it.  For example, the
language Sisal has a lot of support for arrays, but I'm pretty sure
that in Sisal it's not possible to reference an uninitialized variable
at run-time.  Now there are probably some things you can do in Ada that
you can't do in Sisal, but the restrictions enforced by the Sisal
compiler are completely statically reliable.

>Let's try to focus a specific example, the one I gave before, and you tell
>me how your improved approach will work at compile time to detect as
>illegalities all references to uninitialized elements.
>
>I have an array of 2 gigabytes in an allocate-on-demand environment. I use
>this as a sparse hash table, but it is critical that only pages that are
>actually used get referenced, so it is out of the question to initialize
>the table.

I don't understand how your sparse hash table works.
Supposing you go to insert a new entry in the hash table, how
do you detect a hash collision?  Don't you have to initialize
at least one field of the hash slots in order to tell whether
each hash slot is occupied or not?

How do you, as a programmer, know that your code will never reference
any uninitialized slots of this hash table?
If you can tell me that, then I might be able to figure out
a reasonable way for you to tell the compiler the same information.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <dewar.838132465@schonberg>, Robert Dewar <dewar@cs.nyu.edu> wrote:
>I have an array of 2 gigabytes in an allocate-on-demand environment. I use
>this as a sparse hash table, but it is critical that only pages that are
>actually used get referenced, so it is out of the question to initialize
>the table.

I don't understand your example.  A hash table normally has an operation
for determining whether a given item is in the table, and this operation
is going to have to read pages that have never been written.  So, the
allocate-on-demand feature needs to zero out pages upon allocation, or
somehow set them to a well-defined value.

If I write:

    Table: Giant_Array := (others => null);

I believe the DEC Ada compiler on VAX/VMS will notice that null is zero,
and not actually zero out the whole array, but rely on the fact that the
operating system will zero out each page as it is allocated.  Is this
not true?  Are there any other Ada compilers smart enough to do this
(presuming the underlying OS supports allocate-on-demand)?  (Actually,
if it's an array of pointers, it will be initialized to null without the
aggregate -- we had a big argument here a while back about that.)

By the way, a few months ago I wrote a program, and it was running too
slow, so I profiled it, and found that it was spending a huge percentage
of its time setting access values to their default null value, in cases
where I could prove this to be unnecessary.  I actually resorted to a
pretty ugly hack to get the compiler to quit generating those
initializations.  I was using GNAT on Linux.

- Bob

Re: Uninitialized "out" parameters

[Fergus Henderson]

dewar@cs.nyu.edu (Robert Dewar) writes:

>Dynamic bounds of arrays do not help in compile time legality checking, so
>I don't see what relevance they have. And yes, container types are certainly
>appropriate (after all see Bounded_String, which is exactly what you are
>talking about), but again, this has nothing to do with compile time legality
>requirements.

I think it does have relevant to the compile time legality
requirements.  Many container types have an interface that has no
possibility of accessing uninitialized variables even if their
implementation might make use of uninitialized arrays used in ways that
might make it difficult for a static checking system to ensure their
safety.  For example, if the standard library has a `sparse_hash_table'
type, it should solve the problem you mentioned with the 2 gig array.

The down side of strict static checking is that it might make some idioms,
such as an efficient implementation of the `sparse_hash_table' interface,
difficult to express.  The relevance of using containers with higher
levels of abstraction than arrays is that it allows you to combine
efficient implementations with strict static checking while minimizing
any loss of expressiveness.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Richard A. O'Keefe]

dewar@cs.nyu.edu (Robert Dewar) writes:
>Richard said

>  True, Ada is so designed that sound and complete compile-time detection
>  of using uninitialised variables is impossible.

>  But some day Ada will have a successor.  And I can see no reason why that
>  successor should not do a better job than Ada in this respect.

>I doubt it, you certainly do not suggest what that better job might be.

I certainly *thought* I did.  Reference to Mercury isn't a suggestion?
Reference to Dijkstra's notation isn't a suggestion?  Gosh, I'm on the
wrong planet again.

From a requirements point of view, a better job is this:

    the *combination* of the run time checks
    and the static mode/type checks
    is such that any attempt to use an uninitialised variable
    will certainly be reported
    unless the programmer chose to suppress such checks.

>The
>rest of your note talks about checking that is not and cannot be completely
>statically reliable.

This is the same kind of hard-to-swallow straw man argument that Tom Lord
is using in the GC list to argue "because it isn't perfect, you shouldn't
say it's desirable."

As long as the compile time checks can be suppressed, I don't *care* about
the occasional false alarm.

In the case of Mercury, the mode (instantiation state) system occasionally
rules out at compile time programs that would have a reasonable interpretation,
but this is no different from a type system, which also rules out at compile
time programs that would have a reasonable interpretation.  If memory serves
me correctly, there was an Algol 60 compiler (I have the source, published
by the CWI, but it's in Auckland) which allowed
	'procedure' foo(N, A);
	'value' N; 'integer' A;
	'array' A;
	'begin'
	    'if' N = 1 'then' A[1] := 0.0 'else' A[1,2] := 0.0;
	'end';
with the type check done dynamically.  In Ada, this is no longer allowed,
and you don't say "the Ada type check cannot be completely statically
reliable", you say "programs that don't make it through the Ada type
system are *usually* wrong, so we think it's a good tradeoff that some
programs are rejected even though no "type" error would have occurred
at run time."

>As for practical tools, any good Ada compiler should
>indeed warn of many common cases, and tools analogous to lclint are
>perfectly possible with Ada, and/or should be built into the Ada compiler.

Here, if nowhere else, we are very much in agreement.

So let me show you an example of the kind of thing that gcc warns about
for C, that the Ada compiler available to our students does not warn about.

    Script started on Thu 25 Jul 1996 06:12:11 PM EST
    g% cat undef.adb
    with Ada.Text_IO, Ada.Integer_Text_IO;

    procedure Undef is

	X, Y: Integer;

    begin

	Ada.Integer_Text_IO.Get(Y);
	if Y = 0 then
	    X := 1;
	end if;
	Ada.Integer_Text_IO.Put(X);
	Ada.Text_IO.New_Line;

    end Undef;

    g% rm undef undef.ali undef.o
    g% gnatmake undef
    gcc -c undef.adb
    gnatbind -x undef.ali
    gnatlink undef.ali
    g% ./undef
    1
	      0

    g% rm undef undef.ali undef.o
    g% gnatmake undef -cargs -O2 -Wall
    gcc -c -O2 -Wall undef.adb
    gnatbind -x undef.ali
    gnatlink undef.ali
    g% ./undef
    1
	      1
    g% 
    script done on Thu 25 Jul 1996 06:14:14 PM EST

Never mind arrays, it is possible to do a much better job than this for
scalars.  I have read gnatinfo.txt version 1.98, and the pattern
/un(-|)init/ does not occur in it, so if there is some option I should
be setting to get a warning for this, I think it is pardonable that I
have not found it.


>Dynamic bounds of arrays do not help in compile time legality checking, so
>I don't see what relevance they have.

This is a lot like saying "the run time range checks in Ada do not help
in compile time legality checking, so I don't see what relevance they
have".  In both cases, whether it is state or type we are talking about,
the compiler checks what it can, and there is something left over to be
checked at run time.  Dynamic bounds help the compiler because they
give it less work to do.  They completely solve the 2Gb array example
(which I haven't seen yet either, but I'm guessing) because all the compiler
has to prove is that the array elements are accessed *through* the array,
not by any other means which might bypass checking.

>Let's try to focus a specific example, the one I gave before, and you tell
>me how your improved approach will work at compile time to detect as
>illegalities all references to uninitialized elements.

>I have an array of 2 gigabytes in an allocate-on-demand environment. I use
>this as a sparse hash table, but it is critical that only pages that are
>actually used get referenced, so it is out of the question to initialize
>the table.

>How do I make sure that references to this array correspond to previously
>set elements? Even doing this at runtime is awkward, but I see no way of
>designing a type system or any other semantic framework to solve this at
>compile time as a legality issue.

Gosh, how this reminds me of the "Ada doesn't have bitwise operations, so
we ought to do everything in C" arguments.

I don't have a solution if you insist that the thing be modelled by a
simple array.  That's not a failure on my part, because I'm arguing that
simple C-style arrays are a problem.  Since we are talking about a very
large structure, the structure is not a simple "uniform cost" structure
anyway.  What's really going on underneath is in some sense an array of
pointers (the page table), and it's not going to cost us a lot to use
a multilevel structure ourselves.  Each page of that multilevel structure
can be fully initialised when it is created.  I have often done this.

>It is not good enough to just say "we should do better", you have to say
>*exactly* how you can do better, or your position is unconvincing. After
>all, this is an old problem that has not been solved for 38 years now
>(I am counting from Algol-58, it is a bit longer if you count from the
>first Fortran), so if you have a solution, it would be nice to present it!

There are a lot of old solutions, too.  If you insist "but you MUST be
able to handle arrays exactly the way they are now or I'll say Nyah-nyah",
then you'll be saying nyah'nyah until the last proton decays.

-- 
Fifty years of programming language research, and we end up with C++ ???
Richard A. O'Keefe; http://www.cs.rmit.edu.au/~ok; RMIT Comp.Sci.

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <4t7amf$701@goanna.cs.rmit.edu.au>,
Richard A. O'Keefe <ok@goanna.cs.rmit.edu.au> wrote:
>	'procedure' foo(N, A);
>	'value' N; 'integer' A;
>	'array' A;
>	'begin'
>	    'if' N = 1 'then' A[1] := 0.0 'else' A[1,2] := 0.0;
>	'end';
>with the type check done dynamically.  In Ada, this is no longer allowed,
>and you don't say "the Ada type check cannot be completely statically
>reliable", you say "programs that don't make it through the Ada type
>system are *usually* wrong, so we think it's a good tradeoff that some
>programs are rejected even though no "type" error would have occurred
>at run time."

Well, that's true to a great extent, but the Ada 83 designers also said
"for cases where flexibility is more important, we'll give them variant
records", and the Ada 95 designers said, "for those cases, we'll give
them class-wide types".  Both features (variant records and class-wide
types) involve some amount of run-time checking.  In fact one major
advantage of class-wide types is that more cases can be checked at
compile time, but it's never a case of "everything is checked at compile
time, and all run-time checks are evil".

>...In both cases, whether it is state or type we are talking about,
>the compiler checks what it can, and there is something left over to be
>checked at run time.

From that statement, it sound to me like everybody's in agreement.

>There are a lot of old solutions, too.  If you insist "but you MUST be
>able to handle arrays exactly the way they are now or I'll say Nyah-nyah",
>then you'll be saying nyah'nyah until the last proton decays.

True.  We're talking about language design in an Ada newsgroup, and some
people are thinking "what (if anything) would be reasonable to add to
Ada without changing the entire type model and everything else", and
others are thinking "what is a good way to do this, assuming we are
allowed to design the entire language from scratch".  These are two
different questions!  (I enjoy thinking about both.)

- Bob

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <4t1s3n$chv@goanna.cs.rmit.edu.au>,
Richard A. O'Keefe <ok@goanna.cs.rmit.edu.au> wrote:
>In my experience of marking student C programs, trying to use uninitialised
>variables is the commonest non-syntactic error.

This doesn't necessarily indicate a need for compile-time checks.  It
indicates a need for something -- possibly compile-time, possibly
run-time, possibly some mixture.  And you get the usual trade-offs among
efficiency, early error detection, and flexibility.

>...  I have found the program
>'lclint' _extremely_ useful when marking because it does a very good job of
>noticing possible uninitialised variables.

So why don't your students use lclint?

- Bob

Re: Uninitialized "out" parameters

[Richard A. O'Keefe]

bobduff@world.std.com (Robert A Duff) writes:
>In article <4t1s3n$chv@goanna.cs.rmit.edu.au>,
>Richard A. O'Keefe <ok@goanna.cs.rmit.edu.au> wrote:
>>In my experience of marking student C programs, trying to use uninitialised
>>variables is the commonest non-syntactic error.

>This doesn't necessarily indicate a need for compile-time checks.  It
>indicates a need for something -- possibly compile-time, possibly
>run-time, possibly some mixture.  And you get the usual trade-offs among
>efficiency, early error detection, and flexibility.

Bob Duff is the last person I would have expected to argue against static
checks.  Roughly the third most frightening thing I have seen in a computer
manual is the advice
	"If your program is halting with range-checking errors,
	 and you don't want to address those problems immediately,
	 you can always omit the {$R+} compiler directive
	 [thus suppressing the range checks] for the time being."
to be found in the Turbo Pascal 5.0 User Guide on p207.

If I can get a compile-time error (when it is provable that an uninitialised
variable will be used) or warning (when it is not provable that it won't),
why *not*?  In computing, ignorance is bliss.  Run-time checks only tell
you whether the path followed *this time* through the code encountered an
uninitialised variable or not.  One of the things we are trying hard to
teach is "just because your program didn't crash on YOUR test cases doesn't
mean it won't crash on OURS", and relying too much on run-time checks would
tend to exacerbate the problem.

As things stand, I *do* have ready access to tools that do *some* static
uninitialised variable checking for C:  lint, gcc -O2 -Wall, and lclint.
I would of course like to have ready access, at a price suitable for a
not-very-rich university whose government is talking about 10% cuts to
education funding, to run-time checks for C, and to similar compile time
and run time checks for Ada.

>>...  I have found the program
>>'lclint' _extremely_ useful when marking because it does a very good job of
>>noticing possible uninitialised variables.

>So why don't your students use lclint?

To be really honest, because I didn't tell them about it.
I *love* lclint, but it is a free system with a one-mand-and-his-dog
maintenance team, and it tends to have trouble with system headers
(sometimes because they are extremely non-standard C, sometimes because
they are standard but c****y C, sometimes because lclint needs improving)
and it produces a *LOT* of messages.  I have the background and patience
to work through long lists of messages and to work around the occasional
failure of the tool, the students don't.

On the other hand, they *are* told about lint, and they still don't use
that.  Heck, in the last assignment, a couple of students handed in C++
and I don't mean just C-with-//-comments (nor do I mean that it took
*advantage* of C++, just happened to be different enough not to be even
close to compiling under C).

If it comes to that, they are also told to compile with gcc, and I even
gave them a shell script to use that set -O2 -Wall, and they didn't do
that either.

What this leads up to is that a compiler for *student* use needs to have
a high level of static checking switched *by default*.
-- 
Fifty years of programming language research, and we end up with C++ ???
Richard A. O'Keefe; http://www.cs.rmit.edu.au/~ok; RMIT Comp.Sci.

Re: Uninitialized "out" parameters

[Theodore E. Dennison]

Richard A. O'Keefe wrote:
> If it comes to that, they are also told to compile with gcc, and I even
> gave them a shell script to use that set -O2 -Wall, and they didn't do
> that either.
> 
> What this leads up to is that a compiler for *student* use needs to have
> a high level of static checking switched *by default*.

Why don't you have the default .cshrc (or .login) alias "gcc" to 
"gcc -O2 -Wall"? 

-- 
T.E.D.          
                |  Work - mailto:dennison@escmail.orl.mmc.com  |
                |  Home - mailto:dennison@iag.net              |
                |  URL  - http://www.iag.net/~dennison         |

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <4t4r0s$8te@goanna.cs.rmit.edu.au>,
Richard A. O'Keefe <ok@goanna.cs.rmit.edu.au> wrote:
>Bob Duff is the last person I would have expected to argue against static
>checks.

I'm not sure why it surprises you -- after all, I had a hand in writing
an RM that has more run-time checks than you can shake a stick at.  ;-)

Anyway, the decision between compile-time and run-time checking is
always a trade off between safety and flexibility (among other things).
Whenever you check something at compile time, the check is necessarily
stricter than it needs to be -- the halting theorem tells us that.

Consider the case of divide-by-zero.  We could easily catch all
divides-by-zero at compile time, if we're willing to be overly
conservative.  However, this would make the language a lot less useful.

>...  Roughly the third most frightening thing I have seen in a computer
>manual is the advice
>	"If your program is halting with range-checking errors,
>	 and you don't want to address those problems immediately,
>	 you can always omit the {$R+} compiler directive
>	 [thus suppressing the range checks] for the time being."
>to be found in the Turbo Pascal 5.0 User Guide on p207.

Wow.  That is indeed amazingly bad advice.

>If I can get a compile-time error (when it is provable that an uninitialised
>variable will be used) or warning (when it is not provable that it won't),
>why *not*? ...

I certainly agree with the first part (just like I want the compiler to
complain if it *knows* I'm going to divide by zero).  But the second
part is questionable.  It means I'm going to get a lot of spurious
warnings, since my programs typically contain lots of pointers to
heap-allocated records, and it's not feasible for a compiler to do a
very good job for that kind of data.  So what do I do with all those
warnings?  Well, I can ignore them, but that's horrible, because every
time I recompile something, I will keep getting the same stupid warnings
-- the compiler is to stupid to realize that I've already analyzed those
particular warnings, and satisfied myself that they're bogus.  So if
there's ever a *correct* warning, I'll probably miss it.  So, instead,
what I have to do is add in some junk code that makes the compiler shut
up.  For example, I'd probably have to default-initialize every record
component, whether it needs it or not.

Note that in this case, run-time checks will probably find more bugs
than compile-time checks.  This is because I added in all those bogus
initializations to some nonsense value.  So if I do have a bug, I'll get
that nonsense value, and perhaps get a wrong answer.  (At least it will
be the *same* wrong answer every time!)  Whereas if the checking were
done at run time, I would get an exception.  (And of course I understand
that I might fail to test that execution path, which is the problem with
run-time checking.)

Of course, with most Ada compilers, I don't get run-time checks, and I
may or may not get compile-time warnings in some small subset of the
cases.

Anyway, I don't believe compile time checking is always better than run
time checking.  It's a trade-off, and the language designer has to
consider the details of each case.  The compiler writer, too, for
deciding what warnings to produce.

>What this leads up to is that a compiler for *student* use needs to have
>a high level of static checking switched *by default*.

Probably a good idea.

- Bob

Re: Uninitialized "out" parameters

[Richard A. O'Keefe]

bobduff@world.std.com (Robert A Duff) writes:
>Richard A. O'Keefe <ok@goanna.cs.rmit.edu.au> wrote:
>>Bob Duff is the last person I would have expected to argue against static
>>checks.

>I'm not sure why it surprises you -- after all, I had a hand in writing
>an RM that has more run-time checks than you can shake a stick at.  ;-)

Because your postings have given me reason to believe you are a very
competent programmer (Robert Dewar's postings have given me the same
impression of him, even if we don't see eye-to-eye).

>Consider the case of divide-by-zero.  We could easily catch all
>divides-by-zero at compile time, if we're willing to be overly
>conservative.  However, this would make the language a lot less useful.

You are telling this to a programmer who is in the habit of making
sure that every integer division involves a divisor declared to be
Positive rather than Integer, and thinks that this is one good reason
for using Ada instead of C.

Floating point divide by zero, that's another matter.

>>If I can get a compile-time error (when it is provable that an uninitialised
>>variable will be used) or warning (when it is not provable that it won't),
>>why *not*? ...

>I certainly agree with the first part (just like I want the compiler to
>complain if it *knows* I'm going to divide by zero).  But the second
>part is questionable.  It means I'm going to get a lot of spurious
>warnings, since my programs typically contain lots of pointers to
>heap-allocated records, and it's not feasible for a compiler to do a
>very good job for that kind of data.

It _isn't_?  But I've seen lclint *DO* it!  And so does Mercury.
It may or may not be feasible for an Ada95 compiler to do a good job;
I have never written an Ada95 compiler and can't presume to judge
what is or is not feasible for that.  What I *can* say is that it isn't
just "feasible" in principle, there are systems that DO it.

Of course this means having a richer type system, in which it is possible
to express "X is a non-null pointer to a record with an initialised Y
field, an initialised Z field, and an uninitialised W field".  To a first
approximation, the Mercury type/mode system does exactly that.  It's even
possible for such a type system to keep track of whether pointers are
unique or not (Clean does this, it's in the Mercury type system, and the
lclint checker does a practically useful job of it for C).

I wish people wouldn't keep telling me that it isn't feasible to do
what several of the tools I use *DO* do.  This is not rocket science!

>Note that in this case, run-time checks will probably find more bugs
>than compile-time checks.

I am not arguing *against* run-time checks.
I am arguing against run-time checks as a substitute for compile-time
checks.
I would be delighted to have both.
If I have to put up with only one, I will take the compile time checks;
I do not want to impose the run-time burdens that Robert Dewar has
listed on other programmers.

>Anyway, I don't believe compile time checking is always better than run
>time checking.  It's a trade-off, and the language designer has to
>consider the details of each case.  The compiler writer, too, for
>deciding what warnings to produce.

Compile time checking of property Z, in a language that permits it,
    - forbids some meaningful programs
    - ensures that a class of errors is not present
    - has lower run-time penalties, and because the compiler knows
      more, may permit the generation of better code
Run time checking of property Z, in an implementation that permits it,
    - places fewer restrictions on source programs
    - ensures that a class of errors will not be *executed* without warning
    - has higher run-time penalties.

You can substitute the property of your choice for Z.
When Z = "type correctness", it's widely used as a stick to beat Lisp with.
Existing systems show that the analogy holds for
Z = initialised/not and Z = null/non-null unique/shared pointer
in languages designed with such checks in mind.

How much of this could be carried over to a language like Ada that was
*not* designed with such checks in mind is a practical issue on which
Robert Dewar and others can speak with authority and I cannot.  All I
can say is that lclint shows that you can do a lot more than you might
think.

-- 
Fifty years of programming language research, and we end up with C++ ???
Richard A. O'Keefe; http://www.cs.rmit.edu.au/~ok; RMIT Comp.Sci.

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <4t7chp$9mk@goanna.cs.rmit.edu.au>,
Richard A. O'Keefe <ok@goanna.cs.rmit.edu.au> wrote:
>You are telling this to a programmer who is in the habit of making
>sure that every integer division involves a divisor declared to be
>Positive rather than Integer, and thinks that this is one good reason
>for using Ada instead of C.

Yeah, I try to do similar things, when possible.  BUT, first of all it
doesn't always work.  Division is well defined for negatives and
positives, but not zero, and Ada has no "non-zero" constraint.  Also,
you're not detecting divide-by-zero at compile time using this
technique.  You're detecting it earlier, which is good, but still at run
time.  "X: Positive := <some-expression>;" is checked at run time.

>Compile time checking of property Z, in a language that permits it,
>    - forbids some meaningful programs
>    - ensures that a class of errors is not present
>    - has lower run-time penalties, and because the compiler knows
>      more, may permit the generation of better code
>Run time checking of property Z, in an implementation that permits it,
>    - places fewer restrictions on source programs
>    - ensures that a class of errors will not be *executed* without warning
>    - has higher run-time penalties.

Yes, that's what I meant by "it's a trade-off".

- Bob

Re: Uninitialized "out" parameters

[Frank Manning]

In article <4t4r0s$8te@goanna.cs.rmit.edu.au> ok@goanna.cs.rmit.edu.au
(Richard A. O'Keefe) writes:

>          Roughly the third most frightening thing I have seen in a computer
> manual is the advice
>         "If your program is halting with range-checking errors,
>          and you don't want to address those problems immediately,
>          you can always omit the {$R+} compiler directive
>          [thus suppressing the range checks] for the time being."
> to be found in the Turbo Pascal 5.0 User Guide on p207.

Not to be argumentative, but I'm curious as to why you think this is so
bad? Granted, it's bad if a programmer gives in to the temptation to
release a program that fails unless range checks are suppressed. On the
other hand, it might be useful to examine the behavior of the program if
you can somehow prevent it from halting, if only for diagnostic purposes.

-- Frank Manning

Re: Uninitialized "out" parameters

[Richard A. O'Keefe]

frank@bigdog.engr.arizona.edu (Frank Manning) writes:

:In article <4t4r0s$8te@goanna.cs.rmit.edu.au> ok@goanna.cs.rmit.edu.au
:(Richard A. O'Keefe) writes:

:>          Roughly the third most frightening thing I have seen in a computer
:> manual is the advice
:>         "If your program is halting with range-checking errors,
:>          and you don't want to address those problems immediately,
:>          you can always omit the {$R+} compiler directive
:>          [thus suppressing the range checks] for the time being."
:> to be found in the Turbo Pascal 5.0 User Guide on p207.

:Not to be argumentative, but I'm curious as to why you think this is so
:bad?

Because once such a check would have failed, the program is operating
in never-never land, and any *other* problems you may chose to address
first may, in fact, be artefacts of the nonsense you are guaranteed to
be getting.

If your program is halting with range-checking errors,
the only kind of problem that it is useful to diagnose is a problem
that occurs *before* that halt.  Which means that you want to switch
additional checks on so the program halts *earlier*, if anything.

This is especially true in a programming language running on old DOS,
where a range check failure that is not caught may mean that your
program has just scribbled all over the operating system or the debugger...
-- 
Fifty years of programming language research, and we end up with C++ ???
Richard A. O'Keefe; http://www.cs.rmit.edu.au/~ok; RMIT Comp.Sci.

Re: Uninitialized "out" parameters

[Frank Manning]

In article <4t7cnd$9t1@goanna.cs.rmit.edu.au> ok@goanna.cs.rmit.edu.au
(Richard A. O'Keefe) writes:

 <Pros/cons of suppressing range checks temporarily>

> Because once such a check would have failed, the program is operating
> in never-never land, and any *other* problems you may chose to address
> first may, in fact, be artefacts of the nonsense you are guaranteed to
> be getting.
>
> If your program is halting with range-checking errors,
> the only kind of problem that it is useful to diagnose is a problem
> that occurs *before* that halt.  Which means that you want to switch
> additional checks on so the program halts *earlier*, if anything.

OK -- sounds reasonable to me. Thanks for answering my question.

One nit -- I'm not sure I'd go so far as to say you're *guaranteed*
to get nonsense from the program. Suppose overwritten memory is
unused or non-critical? I can't help but wonder how much commercial
software is out there that would fail if range-checking was active.

(My Pascal is rusty -- I assume the manual's use of "range-checking"
refers to array indices going out of bounds?)

-- Frank Manning

Re: Uninitialized "out" parameters

[Fergus Henderson]

dewar@cs.nyu.edu (Robert Dewar) writes:

>... there are VERY good reasons why comparable static systems
>cannot be designed for dealing with the uninitialized variable problem
>(please reread carefully my example of the 2 gig array in an allocate
>on demand environment -- and response to how your decidable system
>would accomodate this requirement).

I haven't seen your example.  I tried searching for it using dejanews,
but I did not find any article in this thread posted by you that
gave an example of a 2 gig array.

But, even without seeing your example, I'm pretty confident that a
statically decidable system could handle those sorts of thing.
In fact, for any given set of examples, there is _guaranteed_ to be
_some_ statically decidable system which handles those examples!
Whether such a system could also be useful, orthogonal, practical, etc.
is of course another question; we'd have to see the examples in
question to be able to judge.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <4t2gb4$a10@mulga.cs.mu.OZ.AU>,
Fergus Henderson <fjh@mundook.cs.mu.OZ.AU> wrote:
>I haven't seen your example.  I tried searching for it using dejanews,
>but I did not find any article in this thread posted by you that
>gave an example of a 2 gig array.

I haven't seen it, either, but I can guess what Robert meant.  You
declare an array (1..One_Zillion), and you trust the operating system to
*not* create storage for most of that array.  Normally, you just set the
first few elements, and the others are memory-mapped to non-existent
storage.  If you were required to say ":= (others => something);", then
the compiler might actually cause writes to all that memory, causing the
OS to actually allocate it, causing Storage_Error, or perhaps just a
huge waste of memory.

On the other hand, if "something" happens to be, say, "0", then some
operating systems can deal with it by initializing memory pages to zero
as they are needed.  The compiler has to know about that fact, and act
accordingly.  The DEC Ada-83 compiler on VAX/VMS does this.

>But, even without seeing your example, I'm pretty confident that a
>statically decidable system could handle those sorts of thing.

In general?  I skept.

>In fact, for any given set of examples, there is _guaranteed_ to be
>_some_ statically decidable system which handles those examples!

True, but the compiler has to know about those examples, or at least
that sort of example.

>Whether such a system could also be useful, orthogonal, practical, etc.
>is of course another question; we'd have to see the examples in
>question to be able to judge.

I still prefer run-time checks in this case.

- Bob

Re: Uninitialized "out" parameters

[Fergus Henderson]

bobduff@world.std.com (Robert A Duff) writes:

>Fergus Henderson <fjh@mundook.cs.mu.OZ.AU> wrote:
>>I haven't seen your example.  I tried searching for it using dejanews,
>>but I did not find any article in this thread posted by you that
>>gave an example of a 2 gig array.
>
>I haven't seen it, either, but I can guess what Robert meant.  You
>declare an array (1..One_Zillion), and you trust the operating system to
>*not* create storage for most of that array.  Normally, you just set the
>first few elements, and the others are memory-mapped to non-existent
>storage.  If you were required to say ":= (others => something);",

I would hope that a good static checking system would not require
initialization at the point of declaration as the only method of
initializing arrays; I would hope that it would allow common patterns
of initialization such as initializing all the elements one by one
in a loop.

>the compiler might actually cause writes to all that memory, causing the
>OS to actually allocate it, causing Storage_Error, or perhaps just a
>huge waste of memory.

I suppose that could be a serious problem (even if it only occurred
for uncommon patterns of initialization).  But you give a solution:

>On the other hand, if "something" happens to be, say, "0", then some
>operating systems can deal with it by initializing memory pages to zero
>as they are needed.  The compiler has to know about that fact, and act
>accordingly.  The DEC Ada-83 compiler on VAX/VMS does this.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Fergus Henderson]

bobduff@world.std.com (Robert A Duff) writes:

>Fergus Henderson <fjh@mundook.cs.mu.OZ.AU> wrote:
>>But, even without seeing your example, I'm pretty confident that a
>>statically decidable system could handle those sorts of thing.
>
>In general?  I skept.

Well, the justification is the following theorem, which you agree with:

>>In fact, for any given set of examples, there is _guaranteed_ to be
>>_some_ statically decidable system which handles those examples!
>
>True, but the compiler has to know about those examples, or at least
>that sort of example.

Right.  I didn't say that such a system would necessary be useful:

>>Whether such a system could also be useful, orthogonal, practical, etc.
>>is of course another question; we'd have to see the examples in
>>question to be able to judge.

So what I'm saying is that it is possible in principle.
I think it remains to be seen whether it would be of net benefit
in practice.  But I think it's certainly something worth exploring.

>I still prefer run-time checks in this case.

For scalars, static checks should work fine.  (One potential difficulty
is that for global variables you would need to do global analysis; that
would make implementation more difficult in a standard separate
compilation environment, but shouldn't pose any fundamental problems.
I suppose tasking might also complicate things; I haven't thought about
how tasking would interact with this sort of static checking.)
Static checks should probably also work fine for records.  (Some sort
of extended mode system would help for record parameters, so that one
could specify that this field has mode `in', and that field has mode
`out', rather than having to give a single mode to the whole record.)
For arrays, it should be possible to statically verify common patterns
of array initialization.  For complicated patterns of array
initialization, it would be possible to use run-time checks, but
run-time checks don't seem to have much advantage over simply requiring
the user to pre-initialize the whole array.

--
Fergus Henderson <fjh@cs.mu.oz.au>   |  "I have always known that the pursuit
WWW: <http://www.cs.mu.oz.au/~fjh>   |  of excellence is a lethal habit"
PGP: finger fjh@128.250.37.3         |     -- the last words of T. S. Garp.

Re: Uninitialized "out" parameters

[Peter Amey]

> procedure Testit is
> 
>   procedure SubP (op : out Integer) is
>   begin
>     op := op+1;
>   end SubP;
> 

If Ada83, the compiler should object to the referencing of an out 
parameter.  With Ada95 this is allowed but I would expect the expression 
op := op + 1 to pick up a random value from memory; if this random value 
+ 1 was outside the range for integer then a run-time error should occur.

Peter

Re: Uninitialized "out" parameters

[Michel Gauthier]

In article <31EEACDA.64880EEB@sage.inel.gov>, Paul Whittington
<paul@sage.inel.gov> wrote:

>>  In the following Ada program, should either the compiler or the run-time
>>  get some kind of error because the out parameter is not initialized?
>>  procedure Testit is
>>    procedure SubP (op : out Integer) is
>>    begin
>>      op := op+1;
>>    end SubP;
>>    I : Integer;
>>  begin
>>    SubP (I);
>>  end Testit;

IMHO, Ada83 'out' parameters were cleanly defined, although sometimes
unpleasent when the compiler answered 'non-readable', but the Ada95 choice
is somewhat ugly (unless am I entirely mistaking), and does not correspond 
to any intuitive view of 'out'.

Here, the intuitive behaviour would be preferably raising Program_error, 
or any alternate allowed behaviour compatible with the 'non-initialised'
'bounded error'. I guess it is, which I have not checked.

This problem is harmless here, but can lead to counterintuitive results when
the type implies initialisation (records, controlled types, access types).
Intuitively, the actual parameter should be Finalize'd prior to entering the
subprogram, and re-Initialize'd as part of elaborating the declarative part
of the subprogram ___Is it the behaviour that results from LRM ?___

Apologies in advance if I am mistaking, but I guess it useful to make 'out'
clearer than it seems to be.

QUESTION : wouldn't it be worth abandoning any use of 'out' parameters ?

----------          ----------          ----------          ---------- 
Michel Gauthier / Laboratoire d'informatique
123 avenue Albert Thomas / F-87060 Limoges
telephone +33 () 55457335 [or ~ 7232]
fax +33 ()  55457315  [or ~7201]
----------          ----------          ----------          ----------
La grande equation de la fin du siecle : windows-X = Mac-Y
The main end-of-century equation : windows-X = Mac-Y
----------          ----------          ----------          ----------
Si l'an 2000 est pour vous un mysticisme stupide, utilisez la base 9
If you feel year 2000 a stupid mystic craze, use numeration base 9
----------          ----------          ----------          ----------

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <gauthier-1907961215520001@164.81.60.62>,
Michel Gauthier <gauthier@unilim.fr> wrote:
>This problem is harmless here, but can lead to counterintuitive results when
>the type implies initialisation (records, controlled types, access types).
>Intuitively, the actual parameter should be Finalize'd prior to entering the
>subprogram, and re-Initialize'd as part of elaborating the declarative part
>of the subprogram ___Is it the behaviour that results from LRM ?___

No.  Controlled types are always passed by reference.  That is, the
formal is a view of the actual (not a copy of it).  So no finalization
takes place on parameter passing.

The original example used an integer.  The parameter passing rules are
different, depending on what sort of type you have.

- Bob

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <31EEACDA.64880EEB@sage.inel.gov>,
Paul Whittington  <paul@sage.inel.gov> wrote:
>In the following Ada program, should either the compiler or the run-time
>get some kind of error because the out parameter is not initialized?
>
>procedure Testit is
>
>  procedure SubP (op : out Integer) is
>  begin
>    op := op+1;
>  end SubP;
>
>  I : Integer;
>
>begin
>  SubP (I);
>end Testit;

Boy, I saw a lot of misinformation in this thread.

The above is legal (meaning OK at compile time), although it was illegal
in Ada 83.

At run time, it's a reference to an uninitialized variable.  In Ada 95,
such references are a bounded error.  The program might raise
Program_Error, or Constraint_Error on the bad reference to op.  Or, it
might continue executing with some value.  This value may cause an
exception later on.  Details of exactly what can happen are in the RM
(and AARM).  In any case, it's not erroneous -- saying "A(I) := 3;"
cannot trash random memory locations, and saying "case I is ..." cannot
cause a wild jump.  This is the general rule for uninitialized variables
-- not a special rule about 'out' parameters.

Note that the above would still be true if I were initialized to some
correct value before the call.  The call to SubP will de-initialize I
(unless the compiler chooses to catch the error at run time).

Note that the rules are different for access types, and for composites;
there are certain types that cannot get de-initialized.  But here, we
have an integer.

A friendly compiler might catch the error and raise an exception.  To
increase the probability of that happening, you can say "pragma
Initialize_Scalars".

A compiler can also give a warning about uninit vars, at compile time.
But the problem is, such warnings are necessarily either overkill or
underkill.  (Overkill = sometimes warn about perfectly correct programs.
Underkill = miss some incorrect cases.)  Overkill might be acceptable if
the compiler were smart enough, but separate compilation gets in the way
of doing a really good job.  My experience is that if warnings
continually "cry wolf", then they're worse than useless.

Some people pointed out that the new rule allowing reads of
uninitialized variables can cause bugs.  True, but the old rule can also
cause bugs:

    procedure Get_Total(A: Some_Array; Total: out Integer) is
        Result: Integer := 0;
    begin
        for I in A'Range loop
            Result := Result + A(I);
        end loop;
        -- Oops, I forgot to say "Total := Result;".
    end Get_Total;

Somebody pointed out that it's possible to define a language such that
uninit vars are impossible.  Certainly true.  I've used languages like
that.  I found that it worked OK for local variables, but for components
of records allocated in the heap, it didn't help -- it just meant that
the programmer has to initialize all such components explicitly to a
bogus value, which actually hides bugs, rather than preventing them.

IMHO, the best solution is to have run-time checks, along with some way
to suppress the checks if they turn out to be too inefficient.  Pragma
Initialize_Scalars *almost* does that, but it doesn't work in all cases.
And it requires writing the pragma.

- Bob

Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Michel Gauthier]

In article <Duwwqn.AD0@world.std.com>, bobduff@world.std.com (Robert A
Duff) wrote:

>>  In article <gauthier-1907961215520001@164.81.60.62>,
>>  Michel Gauthier <gauthier@unilim.fr> wrote:
>>  >This problem is harmless here, but can lead to counterintuitive
results when
>>  >the type implies initialisation (records, controlled types, access types).
>>  >Intuitively, the actual parameter should be Finalize'd prior to
entering the
>>  >subprogram, and re-Initialize'd as part of elaborating the declarative part
>>  >of the subprogram ___Is it the behaviour that results from LRM ?___
>>  
>>  No.  Controlled types are always passed by reference.  That is, the
>>  formal is a view of the actual (not a copy of it).  So no finalization
>>  takes place on parameter passing.

Reference vs. copy passing does not seem to be relevant here.

My intuitive view, and I guess the easier to teach, is that 'out'
parameters involve
initialization at the beginning of the subprogram. I remember a discussion
during
the 9X process about 'out', and a conclusion that there was no longer a
difference
between 'out' and 'in out'. Of course, I do not assert that all 83 compilers did
behave the intuitive way.

So, I repost the question in another form :
___is there a difference between 'out' and 'in out' parameters ?___

Consequent questions are :
___is an 'out' pointer reset to null when entering the subprogram ?___
___is an 'out' controlled object finalised and reinitialised when entering
the subprogram ?___
___is an 'out' record with initial values reinitialised when entering the
subprogram ?___

Finally, ___an AI discussion might be envisaged___. Don't you think so ?

----------          ----------          ----------          ---------- 
Michel Gauthier / Laboratoire d'informatique
123 avenue Albert Thomas / F-87060 Limoges
telephone +33 () 55457335 [or ~ 7232]
fax +33 ()  55457315  [or ~7201]
----------          ----------          ----------          ----------
La grande equation de la fin du siecle : windows-X = Mac-Y
The main end-of-century equation : windows-X = Mac-Y
----------          ----------          ----------          ----------
Si l'an 2000 est pour vous un mysticisme stupide, utilisez la base 9
If you feel year 2000 a stupid mystic craze, use numeration base 9
----------          ----------          ----------          ----------

Re: Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Robert A Duff]

In article <gauthier-2207961213160001@164.81.60.62>,
Michel Gauthier <gauthier@unilim.fr> wrote:
>My intuitive view, and I guess the easier to teach, is that 'out'
>parameters involve
>initialization at the beginning of the subprogram.

I agree that would be the intuitive view, and easier to teach.  It's not
true, though...

On the other hand, it's close enough to being true that if you program
that way, you won't get in trouble.

>... I remember a discussion
>during
>the 9X process about 'out', and a conclusion that there was no longer a
>difference
>between 'out' and 'in out'.

It depends on the type.  For controlled types, there is no difference
between 'out' and 'in out'.

>... Of course, I do not assert that all 83 compilers did
>behave the intuitive way.

Well, it's not a *compiler* issue -- the RM says it.

>So, I repost the question in another form :
>___is there a difference between 'out' and 'in out' parameters ?___

It depends on the type.  For scalars, yes.  For tagged types, no.  For
untagged records with defaulted components, no.  For unconstrained
arrays, no.  See the RM for the complete rule.

Note that in Ada 83, your intuitive view was not true.  One such case is
when the formal is an unconstrained array.  In that case, the bounds of
the array are passed IN, even if the mode is OUT.  For your intuitive
view to work, Ada would have to have truly dynamic arrays (that is,
arrays that can change size on assignment).  Discriminants are similar
to array bounds.

>Consequent questions are :
>___is an 'out' pointer reset to null when entering the subprogram ?___

No.  It is set to whatever the actual was.

>___is an 'out' controlled object finalised and reinitialised when entering
>the subprogram ?___

No.  (Even in your intuitive view, I don't understand why you say "when
entering".  If controlled types used by-copy semantics, then the formal
would be assigned back to the actual after leaving the subprogram.  At
*that* point, the actual would be finalized, the copy done, the actual
Adjusted, and finally the formal finalized.  Initialize wouldn't be
called.)

>___is an 'out' record with initial values reinitialised when entering the
>subprogram ?___

No.  The rules just prevent it from becoming "deinitialized".

>Finally, ___an AI discussion might be envisaged___. Don't you think so ?

No.  (Well, anybody's allowed to send in a comment, but my opinion is
that the rules should not be changed, and my suspicion is that the ARG
would agree.  Of course, I don't speak for the ARG -- I just have one
vote.)

- Bob

Re: Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Robert Dewar]

Bob said, answering another comment

>My intuitive view, and I guess the easier to teach, is that 'out'
>parameters involve
>initialization at the beginning of the subprogram.

I agree that would be the intuitive view, and easier to teach.  It's not
true, though...

On the other hand, it's close enough to being true that if you program
that way, you won't get in trouble.


I disagree, this would lead you to believe that access fields in a record
were initialized to null, and they are definitely not (in both Ada 83
and Ada 95, they are copied from the callers value).

Re: Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Tucker Taft]

Michel Gauthier (gauthier@unilim.fr) wrote:

: So, I repost the question in another form :
: ___is there a difference between 'out' and 'in out' parameters ?___

At what level?  At the implementation level, for a parameter of an elementary
type, there is a big difference.  No value is copied in (unless
it is of an access type).  No constraint check is performed on the
way in (even if it is of an access type).

For a parameter of a composite type, constraint checks all happen
on the way in in any case (whether, IN, IN OUT, or OUT).  If the
parameter is passed by copy, and has no fields requiring default
initialization, then no copy-in is performed.  If the composite parameter
has fields requiring default initialization, or is passed by reference,
then there is no difference at the implementation level.

: Consequent questions are :
: ___is an 'out' pointer reset to null when entering the subprogram ?___

No; its incoming value is preserved.

: ___is an 'out' controlled object finalised and reinitialised when entering
: the subprogram ?___

No; controlled types are always passed by reference.

: ___is an 'out' record with initial values reinitialised when entering the
: subprogram ?___

No, but its incoming value is preserved, if you mean "has fields
requiring default initialization" when you say "record with initial values."

: Finally, ___an AI discussion might be envisaged___. Don't you think so ?

AI meaning "artificial intelligence"? ;-)  Or AI meaning Ada Interpretation?

If you mean the latter, I believe RM95 is pretty clear on all of the
above points.  Do you have a particularly paragraph that you believe
is ambiguous?

: Michel Gauthier / Laboratoire d'informatique
: 123 avenue Albert Thomas / F-87060 Limoges
: telephone +33 () 55457335 [or ~ 7232]
: fax +33 ()  55457315  [or ~7201]

-Tucker Taft   stt@inmet.com   http://www.inmet.com/~stt/
Intermetrics, Inc.  Cambridge, MA  USA

Re: Uninitialized "out" parameters

[John Herro]

bobduff@world.std.com (Robert A Duff) writes:
> The problem isn't OUT params in particular.
> The problem is uninit vars.  If Ada 05 is to
> solve the problem, it ought to do so in a
> uniform manner for all variables, not just
> OUT parameters.
     I agree!  Perhaps Ada 0Y should test for reads of unititialized
variables at run time by default; this could be turned off with a pragma.
     When I was in college in the 60's, I wrote a Fortran IV program that
stored into part of an array, and then accidentally read from a part of
the array that hadn't been stored into.  The run-time system caught it,
and I was *delighted*!  (I don't think my error could have been detected
at compile time.)
     I think the Fortran compiler must have allocated much additional
memory to keep track of which array elements were stored into.  It was a
very worthwhile expense!
     If "Ada, oh why?" does the same thing by default, it would use extra
memory and CPU time, but improve reliability and increase the chances of
detecting errors.  This is certainly in keeping with the Ada philosophy. 
It's analogous to Ada doing bounds checking at run time, which can be
turned off with a pragma.
- John Herro
Software Innovations Technology
http://members.aol.com/AdaTutor
ftp://members.aol.com/AdaTutor

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <4t3f1u$t0u@newsbf02.news.aol.com>,
John Herro <johnherro@aol.com> wrote:
>     I agree!  Perhaps Ada 0Y should test for reads of unititialized
>variables at run time by default; this could be turned off with a pragma.

I agree, too, but I think we can let the market decide, rather than
waiting for Ada 0Y.  Ada 95 compilers are allowed but not required to do
just that.  So, if customers really want it, one would hope that the
compiler vendors will do it.

Please don't remind me of the sad fact that the market doesn't always
decide rational things in the computer business...  ;-)

Also, remember that pragma Initialize_Scalars, or whatever it's called,
comes pretty close to this ideal.

- Bob

Re: Uninitialized variables, Java example

[Arra Avakian]

I find it interesting that the Sun Java compiler warns about POSSIBLE use of
uninitialized variables with a message like

        Variable foo may not have been initialized

This message appears even though all dynamic paths to the use of foo do in 
fact initialize the variable. For example, a switch statement without a 
default initializes the variable in all branches, but the compiler knows that 
if the default case occurs, the variable is not initialized. The programmer 
"knows" that the default case can not occur, but the compiler forces the 
programmer to initialize foo to get a successful compile, i.e. it will not 
produce the class file without the "unnecessary" initialization.

Some may view this as extreme, since the compiler can not know statically the 
"truth", and forces a statically knowable work-around on the programmer. Is 
this what some people want for Ada 0x? It seems to me to be a tradeoff between 
efficiency (an unnecessary initialization to satisfy the compiler) and safety 
(the compiler is then allowed to detect statically known cases of 
uninitialized variables, i.e. true programming errors.) The programmer must 
analyze the error message and determine whether it is a programming error to 
be fixed, or a case where an "unnecessary" initialization is needed to quiet 
the compiler.

The language spec says the following about this subject:

        4.2.3 Setting Local Variables  

         Methods are rigorously checked to be sure that all local variables 
        (variables declared inside a method) are set before they are 
        referenced. Using a local variable before it is initialized is a 
        compile-time error.  


Arra Avakian
Intermetrics, Inc.
733 Concord Avenue
Cambridge, Massachusetts 02138
USA
(617) 661-1840
arra@inmet.com

Re: Uninitialized variables, Java example

[Robert A Duff]

In article <Dv1sME.1u4.0.-s@inmet.camb.inmet.com>,
Arra Avakian <arra@inmet.com> wrote:
>The language spec says the following about this subject:
>
>        4.2.3 Setting Local Variables  
>
>         Methods are rigorously checked to be sure that all local variables 
>        (variables declared inside a method) are set before they are 
>        referenced. Using a local variable before it is initialized is a 
>        compile-time error.  

That's not a language spec, IMHO.  That's a vague description that might
be useful to a person learning Java, but it doesn't tell me exactly
which programs are disallowed at compile time.  Is this feature of Java
precisely defined somewhere (other than in the Java implementation(s))?

The last sentence doesn't say which cases are compile-time errors,
despite the fact that they do NOT use uninit vars.  The halting theorem
tells us that there MUST be some such cases.  And understanding which
cases those are is crucial to deciding whether this is a good rule.

Also, note that this rule explicitly applies to local variables of a
method.  It does not apply to global variables, and it does not apply to
components of objects.  If I remember correctly, Java automatically
initializes those to (null, False, zero, whatever), depending on the
type.  But I could be misremembering my Java.

- Bob

Re: Uninitialized variables, Java example

[Richard A. O'Keefe]

arra@inmet.com (Arra Avakian) writes:
>Some may view this as extreme, since the compiler can not know statically the 
>"truth", and forces a statically knowable work-around on the programmer. Is 
>this what some people want for Ada 0x? It seems to me to be a tradeoff between 
>efficiency (an unnecessary initialization to satisfy the compiler) and safety 
>(the compiler is then allowed to detect statically known cases of 
>uninitialized variables, i.e. true programming errors.)

Wrong.  If the problem is that the programmer knows that the default:
case can never be executed and the compiler doesn't, then the programmer
should TELL the compiler.  For example, in the same situation in C, one
does

	int x;

	switch (e) {
	    case ..: ... x = ..; break;

	    case ..: ... x = ..; break;
	    default: abort();
	}

I actually use a "shouldnt" macro (name stolen with thanks from Interlisp)
which is like assert(0) but cannot be suppressed by NDEBUG.

Now the compiler knows that path can't be traversed too.
Better still, a human reader knows that the original programmmer *thought*
about the problem and didn't just accidentally leave out the default:
And there is no unncessary initialisation anywhere.

In short, this is a perfect example of where a warning about a possibly
uninitialised variable is _really_ a warning about badly written code.
-- 
Fifty years of programming language research, and we end up with C++ ???
Richard A. O'Keefe; http://www.cs.rmit.edu.au/~ok; RMIT Comp.Sci.

Re: Uninitialized variables, Java example

[Robert A Duff]

In article <4t7g2q$ee0@goanna.cs.rmit.edu.au>,
Richard A. O'Keefe <ok@goanna.cs.rmit.edu.au> wrote:
>Wrong.  If the problem is that the programmer knows that the default:
>case can never be executed and the compiler doesn't, then the programmer
>should TELL the compiler.  For example, in the same situation in C, one
>does
>
>	int x;
>
>	switch (e) {
>	    case ..: ... x = ..; break;
>
>	    case ..: ... x = ..; break;
>	    default: abort();
>	}
>
>I actually use a "shouldnt" macro (name stolen with thanks from Interlisp)
>which is like assert(0) but cannot be suppressed by NDEBUG.
>
>Now the compiler knows that path can't be traversed too.

No, it doesn't.  It's quite possible to write the above, and have it
blow up at compile time.

>Better still, a human reader knows that the original programmmer *thought*
>about the problem and didn't just accidentally leave out the default:
>And there is no unncessary initialisation anywhere.

Agreed.  I would say, "Now the compiler knows that THE PROGRAMMER THINKS
that path can't be traversed too."  And another programmer knows that
the first programmer thinks...

- Bob

Re: Uninitialized "out" parameters

[Robert Dewar]

John Herro said

"     If "Ada, oh why?" does the same thing by default, it would use extra
memory and CPU time, but improve reliability and increase the chances of
detecting errors.  This is certainly in keeping with the Ada philosophy.
It's analogous to Ada doing bounds checking at run time, which can be
turned off with a pragma."


It is quite unlikely that the parameters that went into the original
Ada 83 decision will have changed, they certainly had not changed for
Ada 95, and I don't see any likelihood that architectures will develop
in a direction that makes this feasible.

It is not at all analogous to bounds checking. The point with bounds
checking is that the cost of this checking, with good compiler
optimization, is quite reasonable (in the 10-20% range at most, for
typical programs).

The cost of runtime checking of uninitialized variables is MUCH higher.
If you have a type which fills the complete hardware type (e.g. Character,
or Unsigned_32, or, in any reasonable implementation Integer), then
you have to maintain and test a separate boolean bit. Not only does this
double the register pressure, but also it generates potential pipeline
breaks in many architectures which would be very harmful peformance.

Of course there may be specialized architectures which make this kind of
testing feasible, and of course you are certainly allowed to implement
this in Ada 83 or Ada 95 (raising Program_Error as the result of failing
the test), but it is interesting to note that there has been almost no
demand for such implementations, since in the real world, the interest
in performance and easy interface to the outside world would mean that
these checks would almost always have to be suppressed.

The challenge of the Ada design is to provide a reasonable selection of
default runtime checks that do not seriously impact performance. It is
of course possible to check everything at runtime, including for example
incorrect use of unchecked_conversion and unchecked_deallocation, but
these checks are deemed simply too expensive, given the goal of providing
a usable high efficiency language.

C and C++ take the position of checking nothing at runtime. Some other
languages are completely protected (e.g. SNOBOL-4 or SETL). Ada tries
to get most of the advantages of runtime checking without paying too
high a price. Checking for uninitialized variables is deemed across
the line (note that this decision was not particularly controversial,
though it was discussed). One thing that John may not realize is that
the intent is that the checks in Ada be inexpensive enough that many
or most real applicatoins can afford to leave them on. 

I certainly understand that beginners may want an Ada system that checks
uninitialized  variables, and of course Ada/Ed always had this capability,
but it does not seem a significant priority in commercial implementations
of Ada (by commercial here, I mean usable in real applications).

I certainly see nothing in this discussion that has added anything to the
understanding of the issue when it was first discussed (with respect to
Ada) twenty years ago. If anything the development of RISC architectural
techniques has strengthened the argument *against* adding such a requirement,
and it did not even come up in the revision (I can't even rememeber it being
mentioned in the revision requests, and they sure mentioned lots of stuff!)

Re: Uninitialized "out" parameters

[Peter Hermann]

Robert Dewar (dewar@cs.nyu.edu) wrote:
: I certainly understand that beginners may want an Ada system that checks
: uninitialized  variables, and of course Ada/Ed always had this capability,

so I am a beginner, by definition   :-(

--
Peter Hermann  Tel:+49-711-685-3611 Fax:3758 ph@csv.ica.uni-stuttgart.de
Pfaffenwaldring 27, 70569 Stuttgart Uni Computeranwendungen
Team Ada: "C'mon people let the world begin" (Paul McCartney)

Re: Uninitialized "out" parameters

[Stephen J Bevan]

In article <dewar.838165848@schonberg> dewar@cs.nyu.edu (Robert Dewar) writes:
   Of course there may be specialized architectures which make this kind of
   testing feasible, and of course you are certainly allowed to implement
   this in Ada 83 or Ada 95 (raising Program_Error as the result of failing
   the test), but it is interesting to note that there has been almost no
   demand for such implementations, since in the real world, the interest
   in performance and easy interface to the outside world would mean that
   these checks would almost always have to be suppressed.

I would have thought that the success of Purify shows that there is a
great demand for such tools in the C(++) world.  It isn't clear to me
why it should be any different for Ada.  I for one would be very
interested in using an Ada compiler that could *optionally* detect
references to uninitialised variables at runtime (and at compile time
where possible), until that time I'll carry on using GNAT (can't beat
it at the price :-).

Re: Uninitialized "out" parameters

[Robert A Duff]

In article <STEPHENB.96Jul26101657@sorrol.harlqn.co.uk>,
Stephen J Bevan <stephenb@harlequin.co.uk> wrote:
>I would have thought that the success of Purify shows that there is a
>great demand for such tools in the C(++) world.  It isn't clear to me
>why it should be any different for Ada.

Well, there are *some* differences.  Pointers can't be uninitialized in
Ada, and uninit pointers are probably the nastiest sort of uninit vars.
Also (in Ada 95 only), "A[I] := 7;" cannot overwrite arbitrary storage.
If I is uninit, then it will either trash some random element of A, or
raise an exception -- it won't trash anything *else*.

That said, I agree with you.  Purify-like tools are valuable for Ada,
too.

>...  I for one would be very
>interested in using an Ada compiler that could *optionally* detect
>references to uninitialised variables at runtime (and at compile time
>where possible),...

I agree.

- Bob

Re: Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Michel Gauthier]

Thanks to dewar@cs.nyu.edu (Robert Dewar),
      stt@henning.camb.inmet.com (Tucker Taft) and
      bobduff@world.std.com (Robert A Duff) 
          for their answers to my initial posting :  

>>  [...]  
>>  So, I repost the question in another form :
>>  ___is there a difference between 'out' and 'in out' parameters ?___
>>  [...]

They all confirm what I was not entirely sure to understand correctly.
There is no essential difference between 'out' and 'in out' parameters,
and it is probably worth considering them to be the same thing.

IMHO, it was a mistake of the 9X design. It's too late to repair.

Possible useful style rule : avoid 'out' parameters, since they
are error-prone, and prefer 'in out'.

-----

In article <Duy5JB.3o@world.std.com>, Bob Duff wrote:

>> [...]
>>  
>>  Well, it's not a *compiler* issue -- the RM says it.

Agreed with, but I guess nobody assumes that "LRM says"
always implies "all validated compilers do".
By all the ancient Greeks' gods, it would be great if it were true !
Apologies if no explicit compiler names are given here.
  
>>  [...]
>>
>>  Note that in Ada 83, your intuitive view was not true.  One such case is
>>  when the formal is an unconstrained array.  In that case, the bounds of
>>  the array are passed IN, even if the mode is OUT.  For your intuitive
>>  view to work, Ada would have to have truly dynamic arrays (that is,
>>  arrays that can change size on assignment).  Discriminants are similar
>>  to array bounds.

Another view is that bounds and discriminants are properties of the
_variable_ itself, always of mode 'in', and that the mode is a
property of the contents. Possibly formally dubious, but didactically
useful.

-----

In article <DuyC0H.6Fr.0.-s@inmet.camb.inmet.com>,
stt@henning.camb.inmet.com (Tucker Taft) wrote:

>>  Michel Gauthier (gauthier@unilim.fr) wrote:
>>  [...]  
>>  : ___is an 'out' controlled object finalised and reinitialised when entering
>>  : the subprogram ?___
>>  
>>  No; controlled types are always passed by reference.

Parameter passing has _nothing_ to deal with where the
finalisation takes place, either as a preliminary phase of
calling (strict 'out' behaviour) or as part of the first
later assignment (LRM 'in out'-like behaviour).

Possible interpretation of the debate : my view is at a higher level
(in the programming sense) than Bob's and Tuck's, which yields a
false appearence of disagreeing.

>>  [...]   
>>  : Finally, ___an AI discussion might be envisaged___. Don't you think so ?
>>  
>>  AI meaning "artificial intelligence"? ;-)  Or AI meaning Ada Interpretation?

" Ada Interpretation", of course. But all answers converge to 
no doubt in interpretation. So, I remove the suggestion.

----------          ----------          ----------          ---------- 
Michel Gauthier / Laboratoire d'informatique
123 avenue Albert Thomas / F-87060 Limoges
telephone +33 () 55457335 [or ~ 7232]
fax +33 ()  55457315  [or ~7201]
----------          ----------          ----------          ----------
La grande equation de la fin du siecle : windows-X = Mac-Y
The main end-of-century equation : windows-X = Mac-Y
----------          ----------          ----------          ----------
Si l'an 2000 est pour vous un mysticisme stupide, utilisez la base 9
If you feel year 2000 a stupid mystic craze, use numeration base 9
----------          ----------          ----------          ----------

Re: Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Robert Dewar]

Michael said

"They all confirm what I was not entirely sure to understand correctly.
There is no essential difference between 'out' and 'in out' parameters,
and it is probably worth considering them to be the same thing.

IMHO, it was a mistake of the 9X design. It's too late to repair.

Possible useful style rule : avoid 'out' parameters, since they
are error-prone, and prefer 'in out'."



First, they confirmed no such thing. Out and in-out are VERY different
for scalars, as several of the posts emphasized. In particular, using
in-out unnecessarily causes the caller to generate unncecessary code to
initialze the input value. I would actually consider a program that
passed an uninitialized variable as an in parmeter to be violating
the spec of a subprogram. 

As for suggesting a style rule to avoid 'out' parameters, I strongly
object quite independently of the above concerns.

The use of OUT as a mode is a clear and important part of the documentation
of subprograms. In general we document the input-output behavior of a
procedure. The IN and IN OUT parameters describe the input requirements,
the OUT and IN OUT parameters describe the outputs. It is a bad confusion
to take an OUT parameter and convert it to IN OUT.

As for out parameters being error-prone, this seems nonsense to me. Are
you still worrying about the possibility of the variable being uninitialized
on entry? Well making it an in out parameter doesn't change that, because
an uninitialized variable can be passed in. However, it DOES stop the
compiler from issuing some obvious warnings. SUppose we have

   procedure x (a : out integer) is
   begin
	a := a + 1;
        ...

now any reasonable compiler will give a warning. But if you gratuitously
change the parameter to in out, no warning is possible.

Of course it is possible that the compiler might be able to warn you
about passing uninitialized variables as inputs to this procedure. However,
if this is a parameter which really conceptually is an out parameter, which
you have gratuitously changed to in out, then these warnings are of course
conceptually incorrect.

This is definitely NOT an idea that flies!

Re: Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Pascal Obry]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2145 bytes --]


gauthier@unilim.fr (Michel Gauthier) wrote:

>They all confirm what I was not entirely sure to understand correctly.
>There is no essential difference between 'out' and 'in out' parameters,
>and it is probably worth considering them to be the same thing.

>IMHO, it was a mistake of the 9X design. It's too late to repair.

>Possible useful style rule : avoid 'out' parameters, since they
>are error-prone, and prefer 'in out'.

This is certainly true for the designer of the procedure. But 'out'
and 'in out' parameter provide one usefull information for the
caller of the procedure/function.

There is two parts in the programming job. You are sometimes designer
(you are fulfilling a demand - providing a functionality) and
sometimes client (using what has already be done). In our case 'out'
and 'in out' are differents for clients :

	'out'
	you don't have to initialize the parameter. this is done
	inside the procedure/function.

	'in out'
	you have to initialize the paramter because the value passed to
	the procedure/function will be used.


For example :

    package P is

	type T is limited private;

	procedure Init1 (Item : in out T);

	procedure Init2 (Item :    out T);

    end P;


I really prefer Init2 and I found Init1 misleading (how can I pass
an initialized parameter ?). So I don't found the rule 'avoid out
parameter' a good one.

Pascal.

--|------------------------------------------------------------
--| Pascal Obry                               Team-Ada Member |
--|                                                           |
--| EDF-DER-IPN-SID- Ing�nierie des Syst�mes d'Informations   |
--|                                                           |
--| Bureau G1-010           e-mail: pascal.obry@der.edfgdf.fr |
--| 1 Av G�n�ral de Gaulle  voice : +33-1-47.65.50.91         |
--| 92141 Clamart CEDEX     fax   : +33-1-47.65.50.07         |
--| FRANCE                                                    |
--|------------------------------------------------------------
--|
--|   http://ourworld.compuserve.com/homepages/pascal_obry
--|
--|   "The best way to travel is by means of imagination"

Re: Is 'out' different from 'in out' (Was: Uninitialized "out" parameters)

[Tucker Taft]

Michel Gauthier (gauthier@unilim.fr) wrote:
: ...
: Possible useful style rule : avoid 'out' parameters, since they
: are error-prone, and prefer 'in out'.

I don't agree.  If the incoming value of a parameter is irrelevant to 
the algorithm of the routine, it should specify the parameter as 
an "out" parameter.  This conveys more information to the user.  

Furthermore, if the parameter is of an elementary type,
you can end up with more error possibilities with "in out", because if the 
caller forgets to initialize the actual parameter, you might or might not 
get a constraint error on the way in, depending on what "stack junk" 
is sitting in the variable when the call is made.

With an "out" parameter, you only need to remember to initialize
in one place, namely in the beginning of the routine with the OUT
parameter.  No constraint checks are performed on the way in for
an elementary OUT parameter, eliminating the requirement for each
caller to initialize the actual parameter to some irrelevant value.

Note that if you believe it is rare to need to read an OUT parameter anyway, 
then there is no difference in "safety" between the Ada 83 and Ada 95
OUT parameters.  If you believe it is common to need to read an OUT
parameter, then in Ada 83, you had to introduce an extra variable,
and then copy the value from that into the OUT parameter, creating
*two* possibilities for error: forgetting to initialize this extra
variable, and forgetting to copy the extra variable into the OUT
parameter on all exit paths.  The Ada 95 approach seems like a
wash or a win in both cases.

: Michel Gauthier / Laboratoire d'informatique
: 123 avenue Albert Thomas / F-87060 Limoges
: telephone +33 () 55457335 [or ~ 7232]
: fax +33 ()  55457315  [or ~7201]

-Tucker Taft   stt@inmet.com   http://www.inmet.com/~stt/
Intermetrics, Inc.  Cambridge, MA  USA

Re: Uninitialized variables, Java example

[Felaco]

In article <Dv1sME.1u4.0.-s@inmet.camb.inmet.com>,
	arra@inmet.com (Arra Avakian) writes:

>This message appears even though all dynamic paths to the use of foo do in 
>fact initialize the variable. For example, a switch statement without a 
>default initializes the variable in all branches, but the compiler knows that 
>if the default case occurs, the variable is not initialized. The programmer 
>"knows" that the default case can not occur, but the compiler forces the 
>programmer to initialize foo to get a successful compile, i.e. it will not 
>produce the class file without the "unnecessary" initialization.

I recently did some work with a code checker on a large C program.  The 
customer had analyzed the system and had concerns about the quality 
based on the large number of errors the code checker reported.  Many 
of the errors were uninitialized variables.  The example you gave was a 
common reason for the errors.  It was a major hassle to track down the 
real programming errors from the errors that were really just 
lazy programming.  In a language like C, the least you can 
do is put a comment saying /* this case will never happen, so I didn't
bother programming for it */

>Some may view this as extreme, since the compiler can not know statically the 
>"truth", and forces a statically knowable work-around on the programmer. Is 
>this what some people want for Ada 0x? It seems to me to be a tradeoff between 
>efficiency (an unnecessary initialization to satisfy the compiler) and safety 
>(the compiler is then allowed to detect statically known cases of 
>uninitialized variables, i.e. true programming errors.) The programmer must 
>analyze the error message and determine whether it is a programming error to 
>be fixed, or a case where an "unnecessary" initialization is needed to quiet 
>the compiler.

In Ada, the example you gave does not apply, since all values of a case
statement must be covered anyway.  I think an Ada compiler is in a better 
position to check that all variables are initialized than a C compiler 
(or a C derivative language such as Java).

From my experiences, I would rather have to satisfy a pedantic compiler 
than a pedantic customer armed with a code checking tool.  ;-)  I don't 
believe performance is seriously degraded by unnecessarily initializing 
variables.  To allow even the possibility of an uninitialized variable 
being used is bad programming.  

>Arra Avakian
>Intermetrics, Inc.
>733 Concord Avenue
>Cambridge, Massachusetts 02138
>USA
>(617) 661-1840
>arra@inmet.com

-- 
-------------------------------------------------------------------------------
Chris Felaco                               Phone: x4631 (Raynet 444, Local 842)
Raytheon Company                                         Email: bcf@ssd.ray.com
-------------------------------------------------------------------------------