* ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools @ 2016-07-03 17:07 Simon Wright 2016-07-10 21:13 ` Austin Obyrne 0 siblings, 1 reply; 6+ messages in thread From: Simon Wright @ 2016-07-03 17:07 UTC (permalink / raw) At https://sourceforge.net/projects/gnuada/files/GNAT_GCC%20Mac%20OS%20X/6.1.0/native-2016/ From the README, This is GCC 6.1.0 built for Mac OS X El Capitan (10.11.4, Darwin 15.4.0), with the Command Line Tools for Xcode 7. gcc-6.1.0-x86_64-apple-darwin15-2016-bin.tar.bz2 ================================================ Compilers included: Ada, C, C++, Objective C, Objective C++, Fortran. Tools included: Full GPL: ASIS, AUnit, and GDB from GNAT GPL 2016. Gprbuild from the public Git repository[2] at commit c5c26c2683fcdd9c1fc684274faaad1b30c762e1 GPL with Runtime Library Exception[1]: GNATCOLL fron the public GIT repository[3] at commit 719fae1d0b60c31a9f7c0de8b0a143fa57449b47 XMLAda from the public Git repository[4] at commit 8a9536bf161125cb1e12da376e8d7b51f1b33677 [1] http://www.gnu.org/licenses/gcc-exception-faq.html [2] https://github.com/AdaCore/gprbuild [3] https://github.com/AdaCore/gnatcoll [4] https://github.com/AdaCore/xmlada ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools 2016-07-03 17:07 ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools Simon Wright @ 2016-07-10 21:13 ` Austin Obyrne 2016-07-10 21:28 ` Austin Obyrne 0 siblings, 1 reply; 6+ messages in thread From: Austin Obyrne @ 2016-07-10 21:13 UTC (permalink / raw) On Sunday, July 3, 2016 at 6:07:07 PM UTC+1, Simon Wright wrote: > At > https://sourceforge.net/projects/gnuada/files/GNAT_GCC%20Mac%20OS%20X/6.1.0/native-2016/ > > From the README, > > This is GCC 6.1.0 built for Mac OS X El Capitan (10.11.4, Darwin > 15.4.0), with the Command Line Tools for Xcode 7. > > gcc-6.1.0-x86_64-apple-darwin15-2016-bin.tar.bz2 > ================================================ > > Compilers included: Ada, C, C++, Objective C, Objective C++, Fortran. > > Tools included: > > Full GPL: > ASIS, AUnit, and GDB from GNAT GPL 2016. > Gprbuild from the public Git repository[2] at commit > c5c26c2683fcdd9c1fc684274faaad1b30c762e1 > > GPL with Runtime Library Exception[1]: > GNATCOLL fron the public GIT repository[3] at commit > 719fae1d0b60c31a9f7c0de8b0a143fa57449b47 > XMLAda from the public Git repository[4] at commit > 8a9536bf161125cb1e12da376e8d7b51f1b33677 > > [1] http://www.gnu.org/licenses/gcc-exception-faq.html > [2] https://github.com/AdaCore/gprbuild > [3] https://github.com/AdaCore/gnatcoll > [4] https://github.com/AdaCore/xmlada Hi Simon, Please pardon the cross-posting and the way-laying of your attention but there is a matter of some importance here in sci crypt that you might be prepared to help by acting as a trusted-third-party. It is a matter of creating and posting a Challenge Test Sample as follows:- You would be required at your convenience to download and run this program as follows:- 1) Go to, adacrypt.co.uk and, 2) Download the software called "ShuttlePads Cipher" from the title box displayed there. 3)Download the compiler called Ada-95 Compiler Gnat 311.p (you might ignore this if you think so.) Use the software as follows, 4) Edit the parameters of KEY_Pad_1 (Highly visible) to something different to what you find in the downloaded program. 5) Run the program to encrypt any passage pf your choice. 6) Post the ensuing ciphertext string either in sci crypt or in comp.lang.ada *The test piece should be fairly substantial at say circa 1000 characters. I'm sure I speak for many when I say this would be greatly appreciated in sci crypt if you can find the time to do this as a service to the readers here. Yours truly, adacrypt - Austin O'Byrne ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools 2016-07-10 21:13 ` Austin Obyrne @ 2016-07-10 21:28 ` Austin Obyrne 2016-07-10 21:36 ` Austin Obyrne 0 siblings, 1 reply; 6+ messages in thread From: Austin Obyrne @ 2016-07-10 21:28 UTC (permalink / raw) On Sunday, July 10, 2016 at 10:13:33 PM UTC+1, Austin Obyrne wrote: > On Sunday, July 3, 2016 at 6:07:07 PM UTC+1, Simon Wright wrote: > > At > > https://sourceforge.net/projects/gnuada/files/GNAT_GCC%20Mac%20OS%20X/6.1.0/native-2016/ > > > > From the README, > > > > This is GCC 6.1.0 built for Mac OS X El Capitan (10.11.4, Darwin > > 15.4.0), with the Command Line Tools for Xcode 7. > > > > gcc-6.1.0-x86_64-apple-darwin15-2016-bin.tar.bz2 > > ================================================ > > > > Compilers included: Ada, C, C++, Objective C, Objective C++, Fortran. > > > > Tools included: > > > > Full GPL: > > ASIS, AUnit, and GDB from GNAT GPL 2016. > > Gprbuild from the public Git repository[2] at commit > > c5c26c2683fcdd9c1fc684274faaad1b30c762e1 > > > > GPL with Runtime Library Exception[1]: > > GNATCOLL fron the public GIT repository[3] at commit > > 719fae1d0b60c31a9f7c0de8b0a143fa57449b47 > > XMLAda from the public Git repository[4] at commit > > 8a9536bf161125cb1e12da376e8d7b51f1b33677 > > > > [1] http://www.gnu.org/licenses/gcc-exception-faq.html > > [2] https://github.com/AdaCore/gprbuild > > [3] https://github.com/AdaCore/gnatcoll > > [4] https://github.com/AdaCore/xmlada > > > Hi Simon, > > Please pardon the cross-posting and the way-laying of your attention but there is a matter of some importance here in sci crypt that you might be prepared to help by acting as a trusted-third-party. > > It is a matter of creating and posting a Challenge Test Sample as follows:- > > You would be required at your convenience to download and run this program as follows:- > > 1) Go to, > > adacrypt.co.uk > > and, > > 2) Download the software called "ShuttlePads Cipher" from the title box displayed there. > 3)Download the compiler called Ada-95 Compiler Gnat 311.p (you might ignore this if you think so.) > > Use the software as follows, > 4) Edit the parameters of KEY_Pad_1 (Highly visible) to something different to what you find in the downloaded program. > 5) Run the program to encrypt any passage pf your choice. > 6) Post the ensuing ciphertext string either in sci crypt or in comp.lang.ada > > *The test piece should be fairly substantial at say circa 1000 characters. > > I'm sure I speak for many when I say this would be greatly appreciated in sci crypt if you can find the time to do this as a service to the readers here. > > Yours truly, > > adacrypt - Austin O'Byrne Please see (example) in KEY_PAD_1, SliceNum_3 : CONSTANT Integer := 31; StepNum_3 : CONSTANT Integer := 14; --Upstream placemoves RepeatsNum_3: CONSTANT Integer := 6; --Repeats -- scrambling device in 'Load_n_scramble_Pad_3' procedure -- SliceNum_3 + StepNum_3*RepeatsNum_3 <= 126. Please leave "SliceNum" unchanged and only change the other two (product of these must be <95)e.g. 14 x 6 = 94 (<95 ok) a change might be 23 x 3 = 69 (<95 ok) or say 7 x 12 = 84 (<95ok) etc, etc Changing 'SliceNum' requires program source code changes (not essential). Thanks - Austin ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools 2016-07-10 21:28 ` Austin Obyrne @ 2016-07-10 21:36 ` Austin Obyrne 2016-07-10 22:18 ` Simon Wright 0 siblings, 1 reply; 6+ messages in thread From: Austin Obyrne @ 2016-07-10 21:36 UTC (permalink / raw) On Sunday, July 10, 2016 at 10:28:35 PM UTC+1, Austin Obyrne wrote: > On Sunday, July 10, 2016 at 10:13:33 PM UTC+1, Austin Obyrne wrote: > > On Sunday, July 3, 2016 at 6:07:07 PM UTC+1, Simon Wright wrote: > > > At > > > https://sourceforge.net/projects/gnuada/files/GNAT_GCC%20Mac%20OS%20X/6.1.0/native-2016/ > > > > > > From the README, > > > > > > This is GCC 6.1.0 built for Mac OS X El Capitan (10.11.4, Darwin > > > 15.4.0), with the Command Line Tools for Xcode 7. > > > > > > gcc-6.1.0-x86_64-apple-darwin15-2016-bin.tar.bz2 > > > ================================================ > > > > > > Compilers included: Ada, C, C++, Objective C, Objective C++, Fortran. > > > > > > Tools included: > > > > > > Full GPL: > > > ASIS, AUnit, and GDB from GNAT GPL 2016. > > > Gprbuild from the public Git repository[2] at commit > > > c5c26c2683fcdd9c1fc684274faaad1b30c762e1 > > > > > > GPL with Runtime Library Exception[1]: > > > GNATCOLL fron the public GIT repository[3] at commit > > > 719fae1d0b60c31a9f7c0de8b0a143fa57449b47 > > > XMLAda from the public Git repository[4] at commit > > > 8a9536bf161125cb1e12da376e8d7b51f1b33677 > > > > > > [1] http://www.gnu.org/licenses/gcc-exception-faq.html > > > [2] https://github.com/AdaCore/gprbuild > > > [3] https://github.com/AdaCore/gnatcoll > > > [4] https://github.com/AdaCore/xmlada > > > > > > Hi Simon, > > > > Please pardon the cross-posting and the way-laying of your attention but there is a matter of some importance here in sci crypt that you might be prepared to help by acting as a trusted-third-party. > > > > It is a matter of creating and posting a Challenge Test Sample as follows:- > > > > You would be required at your convenience to download and run this program as follows:- > > > > 1) Go to, > > > > adacrypt.co.uk > > > > and, > > > > 2) Download the software called "ShuttlePads Cipher" from the title box displayed there. > > 3)Download the compiler called Ada-95 Compiler Gnat 311.p (you might ignore this if you think so.) > > > > Use the software as follows, > > 4) Edit the parameters of KEY_Pad_1 (Highly visible) to something different to what you find in the downloaded program. > > 5) Run the program to encrypt any passage pf your choice. > > 6) Post the ensuing ciphertext string either in sci crypt or in comp.lang.ada > > > > *The test piece should be fairly substantial at say circa 1000 characters. > > > > I'm sure I speak for many when I say this would be greatly appreciated in sci crypt if you can find the time to do this as a service to the readers here. > > > > Yours truly, > > > > adacrypt - Austin O'Byrne > > > Please see (example) in KEY_PAD_1, > > SliceNum_3 : CONSTANT Integer := 31; > StepNum_3 : CONSTANT Integer := 14; --Upstream placemoves > RepeatsNum_3: CONSTANT Integer := 6; --Repeats > -- scrambling device in 'Load_n_scramble_Pad_3' procedure > -- SliceNum_3 + StepNum_3*RepeatsNum_3 <= 126. > > Please leave "SliceNum" unchanged and only change the other two (product of these must be <95)e.g. > > 14 x 6 = 94 (<95 ok) > a change might be 23 x 3 = 69 (<95 ok) > or say 7 x 12 = 84 (<95ok) > etc, etc > > Changing 'SliceNum' requires program source code changes (not essential). > > Thanks - Austin ERROR - Please change:- *The test piece should be fairly substantial at say circa 1000 characters. This should read:- *The test piece should be fairly substantial at say circa 10,000 characters. Thanks again, Austin. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools 2016-07-10 21:36 ` Austin Obyrne @ 2016-07-10 22:18 ` Simon Wright 2016-07-11 6:22 ` Austin Obyrne 0 siblings, 1 reply; 6+ messages in thread From: Simon Wright @ 2016-07-10 22:18 UTC (permalink / raw) I have emailed you a final refusal. There is no point in your continuing to post here. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools 2016-07-10 22:18 ` Simon Wright @ 2016-07-11 6:22 ` Austin Obyrne 0 siblings, 0 replies; 6+ messages in thread From: Austin Obyrne @ 2016-07-11 6:22 UTC (permalink / raw) On Sunday, July 10, 2016 at 11:18:30 PM UTC+1, Simon Wright wrote: > I have emailed you a final refusal. There is no point in your continuing > to post here. OK - Thanks Simon ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-07-11 6:22 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-07-03 17:07 ANN: GCC 6.1.0 for OS X El Capitan, with GPL 2016 tools Simon Wright 2016-07-10 21:13 ` Austin Obyrne 2016-07-10 21:28 ` Austin Obyrne 2016-07-10 21:36 ` Austin Obyrne 2016-07-10 22:18 ` Simon Wright 2016-07-11 6:22 ` Austin Obyrne
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox