* Re: Clearscreen
@ 2001-12-25 21:33 Gautier Write-only-address
2001-12-26 12:03 ` Clearscreen - ANSI don't work in NT/2000 Liddle Feesh
2001-12-26 12:03 ` Clearscreen Liddle Feesh
0 siblings, 2 replies; 17+ messages in thread
From: Gautier Write-only-address @ 2001-12-25 21:33 UTC (permalink / raw)
To: comp.lang.ada
Liddle Feesh:
>New_Line(N) would eventually fill the screen with blank lines and
>therefore reduce efficiency?
Well... it depends on the nature of your project...
+/- portable, +/- console, +/- DOS, +/- interactive, ... ?
Maybe the ANSI solution is the tradeoff you are looking for.
Just by searching the Web with "procedure gotoxy is ansi ada"
I found a lot of ready-made packages. E.g. this one
http://perso.club-internet.fr/ariffart/ada/ada05.html
HTH
____________________________________________________________
Gautier -- http://www.mysunrise.ch/users/gdm/index.htm#Ada
NB: For a direct answer, address on the Web site!
_________________________________________________________________
Join the world�s largest e-mail service with MSN Hotmail.
http://www.hotmail.com
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-25 21:33 Clearscreen Gautier Write-only-address @ 2001-12-26 12:03 ` Liddle Feesh 2001-12-26 14:56 ` Michael Bode 2001-12-26 12:03 ` Clearscreen Liddle Feesh 1 sibling, 1 reply; 17+ messages in thread From: Liddle Feesh @ 2001-12-26 12:03 UTC (permalink / raw) "Gautier Write-only-address" wrote: > Liddle Feesh: > > >New_Line(N) would eventually fill the screen with blank lines and > >therefore reduce efficiency? > > Well... it depends on the nature of your project... > +/- portable, +/- console, +/- DOS, +/- interactive, ... ? > Maybe the ANSI solution is the tradeoff you are looking for. > Just by searching the Web with "procedure gotoxy is ansi ada" > I found a lot of ready-made packages. E.g. this one > http://perso.club-internet.fr/ariffart/ada/ada05.html Thanks for that Gautier, Unfortunately, I'm still having problems getting the ANSI solution to work. I am running Windows 2000, and I know that the ANSI.SYS drivers must be loaded to function properly. I've added two lines to both config.nt and config.sys to load the drivers. Whenver I execute: put( Ascii.ESC & "[2J" ); --or any other derivative of.. All I get is [2J printed on the screen. Any ideas? ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-26 12:03 ` Clearscreen - ANSI don't work in NT/2000 Liddle Feesh @ 2001-12-26 14:56 ` Michael Bode 2001-12-26 15:15 ` Michal Nowak 0 siblings, 1 reply; 17+ messages in thread From: Michael Bode @ 2001-12-26 14:56 UTC (permalink / raw) "Liddle Feesh" <no_see_reply_address@spam.com> writes: > Unfortunately, I'm still having problems getting the ANSI solution to work. > I am running Windows 2000, and I know that the ANSI.SYS drivers must be > loaded to function properly. Forget ANSI with NT. Microsoft is not compatible to any standard in the world. > Any ideas? You need to use the Windows NT console API. I've had the same problem and found a package from Jerry van Dijk(*) which implements screen positioning functions. I also modified the ANSI terminal emulator packages by Michael Feldman(**) to work with the Console API package. So you can write programms that are portable from NT to OSses which have ANSI by simply recompiling them with a different package. I would mail you the whole stuff, if you get yourself a real email address. (*) I don't remember the URL where I found that (**) Part of the gnat sample programms ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-26 14:56 ` Michael Bode @ 2001-12-26 15:15 ` Michal Nowak 2001-12-26 15:19 ` Jerry van Dijk 2001-12-26 22:14 ` Liddle Feesh 0 siblings, 2 replies; 17+ messages in thread From: Michal Nowak @ 2001-12-26 15:15 UTC (permalink / raw) To: comp.lang.ada usegroup->mailing list gateway On 01-12-26 at 15:56 Michael Bode wrote: >"Liddle Feesh" <no_see_reply_address@spam.com> writes: > >> Unfortunately, I'm still having problems getting the ANSI solution to >work. >> I am running Windows 2000, and I know that the ANSI.SYS drivers must be >> loaded to function properly. > >Forget ANSI with NT. Microsoft is not compatible to any standard in the >world. > >> Any ideas? > >You need to use the Windows NT console API. I've had the same problem >and found a package from Jerry van Dijk(*) which implements screen >positioning functions. I also modified the ANSI terminal emulator >packages by Michael Feldman(**) to work with the Console API package. So >you can write programms that are portable from NT to OSses which have >ANSI by simply recompiling them with a different package. > >I would mail you the whole stuff, if you get yourself a real email address. > >(*) I don't remember the URL where I found that http://home.trouwweb.nl/Jerry/packages.html#CONSOLE Mike ----------------------------------------- ____| \%/ |~~\ O | o>> Mike Nowak | T | / > vinnie@inetia.pl | http://www.geocities.com/vinnie14pl _|__ ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-26 15:15 ` Michal Nowak @ 2001-12-26 15:19 ` Jerry van Dijk 2001-12-27 0:04 ` Liddle Feesh 2001-12-28 17:35 ` Ted Dennison 2001-12-26 22:14 ` Liddle Feesh 1 sibling, 2 replies; 17+ messages in thread From: Jerry van Dijk @ 2001-12-26 15:19 UTC (permalink / raw) Michal Nowak <vinnie@inetia.pl> writes: > http://home.trouwweb.nl/Jerry/packages.html#CONSOLE Which might be a good moment to remark that as of january 1 my webpage will move to: http://users.ncrvnet.nl/gmvandijk But right now both addresses should work. -- -- Jerry van Dijk | email: jvandyk@attglobal.net -- Leiden, Holland | web: users.ncrvnet.nl/gmvdijk ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-26 15:19 ` Jerry van Dijk @ 2001-12-27 0:04 ` Liddle Feesh 2001-12-28 17:35 ` Ted Dennison 1 sibling, 0 replies; 17+ messages in thread From: Liddle Feesh @ 2001-12-27 0:04 UTC (permalink / raw) "Jerry van Dijk" wrote: > Which might be a good moment to remark that as of january 1 my webpage will > move to: > > http://users.ncrvnet.nl/gmvandijk > > But right now both addresses should work. Excellent. I've used your package as a temporary workaround for the Win32 Console problem in Windows NT. I've left full commentary as credit, and will add your updated site URL to the documentation. -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-26 15:19 ` Jerry van Dijk 2001-12-27 0:04 ` Liddle Feesh @ 2001-12-28 17:35 ` Ted Dennison 2001-12-28 21:21 ` Jerry van Dijk 2001-12-28 21:58 ` Liddle Feesh 1 sibling, 2 replies; 17+ messages in thread From: Ted Dennison @ 2001-12-28 17:35 UTC (permalink / raw) In article <wk1yhiau1j.fsf@attglobal.net>, Jerry van Dijk says... > http://users.ncrvnet.nl/gmvandijk > >But right now both addresses should work. The above address just gives me a 404 error, and a bunch of text in a language I don't understand. On the plus side, its just about the prettiest 404 error I've ever seen. :-) --- T.E.D. homepage - http://www.telepath.com/dennison/Ted/TED.html No trees were killed in the sending of this message. However a large number of electrons were terribly inconvenienced. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-28 17:35 ` Ted Dennison @ 2001-12-28 21:21 ` Jerry van Dijk 2001-12-28 21:58 ` Liddle Feesh 1 sibling, 0 replies; 17+ messages in thread From: Jerry van Dijk @ 2001-12-28 21:21 UTC (permalink / raw) Ted Dennison<dennison@telepath.com> writes: > In article <wk1yhiau1j.fsf@attglobal.net>, Jerry van Dijk says... > > http://users.ncrvnet.nl/gmvandijk > > > >But right now both addresses should work. > Oops, that should be: http://users.ncrvnet.nl/gmvdijk as in my signature... :-( -- -- Jerry van Dijk | email: jvandyk@attglobal.net -- Leiden, Holland | web: users.ncrvnet.nl/gmvdijk ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-28 17:35 ` Ted Dennison 2001-12-28 21:21 ` Jerry van Dijk @ 2001-12-28 21:58 ` Liddle Feesh 1 sibling, 0 replies; 17+ messages in thread From: Liddle Feesh @ 2001-12-28 21:58 UTC (permalink / raw) "Ted Dennison" wrote: > In article <wk1yhiau1j.fsf@attglobal.net>, Jerry van Dijk says... > > http://users.ncrvnet.nl/gmvandijk > > > >But right now both addresses should work. > > The above address just gives me a 404 error, and a bunch of text in a language I > don't understand. > > On the plus side, its just about the prettiest 404 error I've ever seen. :-) Very pretty 404 ;) -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen - ANSI don't work in NT/2000 2001-12-26 15:15 ` Michal Nowak 2001-12-26 15:19 ` Jerry van Dijk @ 2001-12-26 22:14 ` Liddle Feesh 1 sibling, 0 replies; 17+ messages in thread From: Liddle Feesh @ 2001-12-26 22:14 UTC (permalink / raw) "Michal Nowak" wrote: > http://home.trouwweb.nl/Jerry/packages.html#CONSOLE Brilliant, thankyou both Micha(e)ls. Email address is as in Reply-To, but with the word "UNDERPANTS" removed as a SPAM filter. -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen 2001-12-25 21:33 Clearscreen Gautier Write-only-address 2001-12-26 12:03 ` Clearscreen - ANSI don't work in NT/2000 Liddle Feesh @ 2001-12-26 12:03 ` Liddle Feesh 1 sibling, 0 replies; 17+ messages in thread From: Liddle Feesh @ 2001-12-26 12:03 UTC (permalink / raw) "Gautier Write-only-address" wrote: > HTH Yes, and thankyou for replying on Christmas Day. Best Regards, -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen
@ 2001-12-24 0:40 Gautier Write-only-address
2001-12-24 14:12 ` Clearscreen Liddle Feesh
0 siblings, 1 reply; 17+ messages in thread
From: Gautier Write-only-address @ 2001-12-24 0:40 UTC (permalink / raw)
To: comp.lang.ada
>Still none the wiser after loading the ANSI.SYS driver.
>
>Program is running in the DOS environment
In that case you might be interested by the package
PC_TextScreen (pctextsc.ads,pctextsc.adb) in
dos_paqs.zip, page below. Of course not as portable
as a New_Line(N).
________________________________________________________
Gautier -- http://www.mysunrise.ch/users/gdm/gsoft.htm
NB: For a direct answer, address on the Web site!
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen 2001-12-24 0:40 Clearscreen Gautier Write-only-address @ 2001-12-24 14:12 ` Liddle Feesh 0 siblings, 0 replies; 17+ messages in thread From: Liddle Feesh @ 2001-12-24 14:12 UTC (permalink / raw) "Gautier Write-only-address" wrote: > >Still none the wiser after loading the ANSI.SYS driver. > > > >Program is running in the DOS environment > > In that case you might be interested by the package > PC_TextScreen (pctextsc.ads,pctextsc.adb) in > dos_paqs.zip, page below. Of course not as portable > as a New_Line(N). New_Line(N) would eventually fill the screen with blank lines and therefore reduce efficiency? -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Clearscreen @ 2001-12-24 0:17 Liddle Feesh 2001-12-24 0:19 ` Clearscreen Liddle Feesh 0 siblings, 1 reply; 17+ messages in thread From: Liddle Feesh @ 2001-12-24 0:17 UTC (permalink / raw) Sounds simple, but anyone know how to clear the screen in Ada? I've noticed quite a lot that the [12j needs to be 'putted' after the escape char, but apart from that - I'm baffled... Any hints? -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen 2001-12-24 0:17 Clearscreen Liddle Feesh @ 2001-12-24 0:19 ` Liddle Feesh 2001-12-25 0:17 ` Clearscreen Frode Tennebø 0 siblings, 1 reply; 17+ messages in thread From: Liddle Feesh @ 2001-12-24 0:19 UTC (permalink / raw) "Liddle Feesh" wrote: > Sounds simple, but anyone know how to clear the screen in Ada? > > I've noticed quite a lot that the [12j needs to be 'putted' after the escape > char, but apart from that - I'm baffled... > > Any hints? Still none the wiser after loading the ANSI.SYS driver. Program is running in the DOS environment -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen 2001-12-24 0:19 ` Clearscreen Liddle Feesh @ 2001-12-25 0:17 ` Frode Tennebø 2001-12-26 12:04 ` Clearscreen Liddle Feesh 0 siblings, 1 reply; 17+ messages in thread From: Frode Tennebø @ 2001-12-25 0:17 UTC (permalink / raw) On Monday 24 December 2001 01:19 Liddle Feesh wrote: > "Liddle Feesh" wrote: >> Sounds simple, but anyone know how to clear the screen in Ada? >> >> I've noticed quite a lot that the [12j needs to be 'putted' after the > escape >> char, but apart from that - I'm baffled... >> >> Any hints? > > Still none the wiser after loading the ANSI.SYS driver. > > Program is running in the DOS environment I have attached a package I made a LONG time ago when I was fiddeling about in DOS. Feel free to adapt them to your needs. -Frode -- ^ Frode Tenneb� | email: frode@tennebo.com | Frode@IRC ^ | with Standard.Disclaimer; use Standard.Disclaimer; | --**************************************************************************-- --* THIS BRILLIANT PACKAGE *-- --* WAS MADE BY *-- --* FRODE TENNEBO *-- --* (C) 30.10.1992 *-- --**************************************************************************-- package DISPLAY is subtype T_ATTRIB is NATURAL range 0..8; type E_ATTRIB is (normal,bold,flash,inverse,hidden); --You can either use the subtype T_ATTRIB, which is a numerical type -- with the values 0, 1, 4, 5, 7, and 8, -- or E_ATTRIB, which is a enumerical type with the values -- indicated above, -- with the procedure TEXT_ATTRIBUTES. --It's your choice! subtype T_COLOR is NATURAL range 0..7; type E_COLOR is (black,red,green,yellow,blue,magenta,cyan,white); --You can either use the subtype T_COLOR, which is a numerical type -- ranging from 0 to 7 including, -- or E_COLOR, which is a enumerical type with the values -- indicated above, -- with the procedures FOREGROUND_COLOR and BACKGROUND_COLOR. --It's your choice! subtype T_MODE is NATURAL range 0..19; type E_MODE is (HI,LO); --You can either use the subtype T_MODE, which is a numerical type -- ranging from 0 to 7 and 13 to 19 including, -- or E_MODE, which is a special enumerical type with the two -- quicky values indicated above, -- with the procedure TEXT_MODE. --It's your choice! --Also refer to the procedure in question! --******************************************************************-- procedure GOTOXY (col:in NATURAL:=1;row:in NATURAL:=1); --Moves cursor to the specified position. Default is 1,1. --The upper-left corner is 1,1; bottom-right is 80,25. --NB! 0,0 and 1,1 are identical screen cooridnates!?!? procedure UP (lines :in NATURAL:=1); --Moves cursor up the specified numbers of lines. Default is 1. procedure DOWN (lines :in NATURAL:=1); --Moves cursor down the specified number of lines. Default is 1. procedure RIGHT (col :in NATURAL:=1); --Moves cursor right the specified number of columns. Default is 1. procedure LEFT (col :in NATURAL:=1); --Moves cursor left the specified number of columns. Defualt is 1. procedure SAVE_CURSOR; --Saves current cursor position. Use with RESTORE_CURSOR. procedure RESTORE_CURSOR; --Restores cursor to the position saved by SAVE_CURSOR. procedure CLRSCR; --Clears the display and sets cursor to 0,0. procedure CLREOL; --Clears the line from cursor porsition to the end of line. procedure TEXT_ATTRIBUTES(a :in E_ATTRIB); --defualt: normal. --Sets the text attributes to: -- Normal,Bold on,Flash on,Inverse,Hidden. procedure TEXT_ATTRIBUTES(a :in T_ATTRIB:=0); --Sets the text attributes to: -- 0=normal 1=bold 5=flash -- 7=inverse 8=hidden procedure FOREGROUND_COLOR(C :in E_COLOR); --default: white. --Sets the foreground color to: -- black, red, green,yellow,blue,magenta,cyan or White procedure FOREGROUND_COLOR(C :in T_COLOR:=7); --Sets the foreground color to a specified color: -- 0=black 1=red 2=green 3=Yellow -- 4=Blue 5=Magenta 6=Cyan 7=White procedure BACKGROUND_COLOR(c :in E_COLOR); --default: black. --Sets the background color to a specified color. --Same as for FOREGROUND_COLOR. procedure BACKGROUND_COLOR(c :in T_COLOR:=0); --Sets the background color to a specified color. --Same as for BACKGROUND_COLOR. procedure TEXT_MODE (mode :in E_MODE); --defualt: hi. --Sets the display mode to: -- LO=40x25 color HI=80x25 color procedure TEXT_MODE (mode :in T_MODE:=3); --Sets the display mode to: -- 0=40x25 mono 1=40x25 color 2=80x25 mono -- 3=80x25 color 4=320x200 4-color 5=320x200 mono -- 6=640x200 mono 7=Line warping 13=320x200 color --14=640x200 16-color 15=640x350 mono 16=640x350 16-color --17=640x480 mono 18=640x480 16-color 19=320x200 256-color procedure REPORT_ERROR (str :in STRING); --Prints the error message in the string str centered on --the bottom line. Press any key to continue from here. procedure BELL (b :in NATURAL:=1); --Makes the bell sound for b number of times. end DISPLAY; --**************************************************************************-- --* THIS BRILLIANT PACKAGE *-- --* WAS MADE BY *-- --* FRODE TENNEBO *-- --* (C) 30.10.1992 *-- --**************************************************************************-- with TEXT_IO; use TEXT_IO; package body DISPLAY is package INT_IO is new INTEGER_IO(INTEGER); use INT_IO; ESC :constant CHARACTER :=ASCII.ESC; BEL :constant CHARACTER :=ASCII.BEL; SEQ :STRING(1..2) :=(ESC & "["); tmod :T_MODE :=3; fcol :T_COLOR :=7; bcol :T_COLOR :=0; att :NATURAL :=0; function FIND_COLOR(c :in E_COLOR) return T_COLOR is col :T_COLOR; begin case c is when black=> col:=0; when red=> col:=1; when green=> col:=2; when yellow=> col:=3; when blue=> col:=4; when magenta=> col:=5; when cyan=> col:=6; when white=> col:=7; end case; return col; end FIND_COLOR; procedure GOTOXY (col:in NATURAL:=1;row:in NATURAL:=1) is begin put (seq); put (row,1); put (";"); put (col,1); put ("f"); end GOTOXY; procedure UP (lines :in NATURAL:=1) is begin put (seq); put (lines,1); put ("A"); end UP; procedure DOWN (lines :in NATURAL:=1) is begin put (seq); put (lines,1); put ("B"); end DOWN; procedure RIGHT (col :in NATURAL:=1) is begin put (seq); put (col,1); put ("C"); end RIGHT; procedure LEFT (col :in NATURAL:=1) is begin put (seq); put (col,1); put ("D"); end LEFT; procedure SAVE_CURSOR is begin put (seq); put ("s"); end SAVE_CURSOR; procedure RESTORE_CURSOR is begin put (seq); put ("u"); end RESTORE_CURSOR; procedure CLRSCR is begin put (seq); put ("2J"); end CLRSCR; procedure CLREOL is begin put (seq); put ("K"); end CLREOL; procedure TEXT_ATTRIBUTES (a :in E_ATTRIB) is begin case a is when normal => att:=0; when bold => att:=1; when flash => att:=5; when inverse => att:=7; when hidden => att:=8; end case; put (seq); put (att,1); put ("m"); end TEXT_ATTRIBUTES; procedure TEXT_ATTRIBUTES (a :in T_ATTRIB:=0) is begin put (seq); put (att,1); put ("m"); end TEXT_ATTRIBUTES; procedure FOREGROUND_COLOR (c :in E_COLOR) is begin FOREGROUND_COLOR(find_color(c)); end FOREGROUND_COLOR; procedure FOREGROUND_COLOR (C :in T_COLOR:=7) is begin put (seq); put (fcol+30,1); put ("m"); end FOREGROUND_COLOR; procedure BACKGROUND_COLOR (c :in E_COLOR) is begin BACKGROUND_COLOR(find_color(c)); end BACKGROUND_COLOR; procedure BACKGROUND_COLOR (c :in T_COLOR:=0) is begin put (seq); put (bcol+40,1); put ("m"); end BACKGROUND_COLOR; procedure TEXT_MODE (mode :in E_MODE) is begin case mode is when LO => tmod:=1; when HI => tmod:=3; end case; put (seq & "="); put (tmod,1); put ("h"); end TEXT_MODE; procedure TEXT_MODE (mode :in T_MODE:=3) is begin put (seq & "="); put (tmod,1); put ("h"); end TEXT_MODE; procedure REPORT_ERROR (str :in STRING) is len :integer :=0; begin case tmod is when 1..2 => len:=40; when 3..4 => len:=80; when others => null; end case; if len/=0 then SAVE_CURSOR; gotoxy((len-str'length)/2,25); put (str); gotoxy(0,25); CLREOL; RESTORE_CURSOR; end if; end REPORT_ERROR; procedure BELL (b :in NATURAL:=1) is begin for f in 1..b loop put (bel); end loop; end BELL; begin TEXT_ATTRIBUTES(att); TEXT_MODE(tmod); FOREGROUND_COLOR(fcol); BACKGROUND_COLOR(bcol); end DISPLAY; ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Clearscreen 2001-12-25 0:17 ` Clearscreen Frode Tennebø @ 2001-12-26 12:04 ` Liddle Feesh 0 siblings, 0 replies; 17+ messages in thread From: Liddle Feesh @ 2001-12-26 12:04 UTC (permalink / raw) [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain, Size: 345 bytes --] "Frode Tenneb�" wrote: > I have attached a package I made a LONG time ago when I was > fiddeling about in DOS. Feel free to adapt them to your needs. Thanks Frode - have archived for future use. Any use of a significant portion will be credited. Happy Christmas! -- Liddle Feesh ' O 0 o <"//>< ' o'^ (Remove UNDERPANTS to reply) ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2001-12-28 21:58 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-12-25 21:33 Clearscreen Gautier Write-only-address 2001-12-26 12:03 ` Clearscreen - ANSI don't work in NT/2000 Liddle Feesh 2001-12-26 14:56 ` Michael Bode 2001-12-26 15:15 ` Michal Nowak 2001-12-26 15:19 ` Jerry van Dijk 2001-12-27 0:04 ` Liddle Feesh 2001-12-28 17:35 ` Ted Dennison 2001-12-28 21:21 ` Jerry van Dijk 2001-12-28 21:58 ` Liddle Feesh 2001-12-26 22:14 ` Liddle Feesh 2001-12-26 12:03 ` Clearscreen Liddle Feesh -- strict thread matches above, loose matches on Subject: below -- 2001-12-24 0:40 Clearscreen Gautier Write-only-address 2001-12-24 14:12 ` Clearscreen Liddle Feesh 2001-12-24 0:17 Clearscreen Liddle Feesh 2001-12-24 0:19 ` Clearscreen Liddle Feesh 2001-12-25 0:17 ` Clearscreen Frode Tennebø 2001-12-26 12:04 ` Clearscreen Liddle Feesh
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox