ada newbie

ada newbie

[mop]

so my data looks like this.   In C I could create a structure and go from
there.   I'm new to Ada and need help on how to setup the data.  I suspect I
could use some sort of a record once I setup the structure in Ada to pass
the data.


example data
word          bit            function            remarks
1                2-0          command         logic 001
                    3            mode               logic 0 - normal
                                                          logic 1 -
diagnostic
                  7-4          spare

etc.etc
8                7-0        checksum          sum of above message bytes


i'll be sending data across a serial port and need to change the parity bit
on the fly.  from MarkParity to SpaceParity.   So I'll send word 1 - default
parity bit MarkParity then change to SpaceParity for the rest of the data.

help.  already wrote fully functional GUI is C but now need to do the same
in Ada and have no idea where to start.

Re: ada newbie

[Marin David Condic]

You are delving into things (representation) that can be hardware/compiler
dependent.

From the ARM 13.5.1 - an example of how to create records wherein you
control representation issues. (Read chapter 13 - its really worth it if you
want to do low level programming like this.)

type Program_Status_Word is
    record
        System_Mask : Byte_Mask;
        Protection_Key : Integer range 0 .. 3;
        Machine_State : State_Mask;
        Interrupt_Cause : Interruption_Code;
        Ilc : Integer range 0 .. 3;
        Cc : Integer range 0 .. 3;
        Program_Mask : Mode_Mask;
        Inst_Address : Address;
    end record;

for Program_Status_Word use
    record
        System_Mask at 0*Word range 0 .. 7;
        Protection_Key at 0*Word range 10 .. 11; -- bits 8,9 unused
        Machine_State at 0*Word range 12 .. 15;
        Interrupt_Cause at 0*Word range 16 .. 31;
        Ilc at 1*Word range 0 .. 1; -- second word
        Cc at 1*Word range 2 .. 3;
        Program_Mask at 1*Word range 4 .. 7;
        Inst_Address at 1*Word range 8 .. 31;
    end record;

for Program_Status_Word'Size use 8*System.Storage_Unit;
for Program_Status_Word'Alignment use 8;

In general, you can see how the representation clause indicates that you
have to specify a byte offset (assuming a byte oriented machine) and a bit
range for each of the record elements. You don't need to create "spares" -
just don't specify anything occupying those bits.

Hope this gets you going - but you *really* should read chapter 13 and look
at your compiler documentation and target processor to make sure that you
get the clauses correct for *your* specific hardware. You'll discover that
in general Ada is very good at letting you control the low level stuff...

MDC
--
Marin David Condic
Senior Software Engineer
Pace Micro Technology Americas    www.pacemicro.com
Enabling the digital revolution
e-Mail:    marin.condic@pacemicro.com
Web:      http://www.mcondic.com/


"mop" <mop65715@pegasus.cc.ucf.edu> wrote in message
news:9kp053$ro0$1@zeus.orl.lmco.com...
> so my data looks like this.   In C I could create a structure and go from
> there.   I'm new to Ada and need help on how to setup the data.  I suspect
I
> could use some sort of a record once I setup the structure in Ada to pass
> the data.
>
>
> example data
> word          bit            function            remarks
> 1                2-0          command         logic 001
>                     3            mode               logic 0 - normal
>                                                           logic 1 -
> diagnostic
>                   7-4          spare
>
> etc.etc
> 8                7-0        checksum          sum of above message bytes
>
>
> i'll be sending data across a serial port and need to change the parity
bit
> on the fly.  from MarkParity to SpaceParity.   So I'll send word 1 -
default
> parity bit MarkParity then change to SpaceParity for the rest of the data.
>
> help.  already wrote fully functional GUI is C but now need to do the same
> in Ada and have no idea where to start.
>
>

Re: Ada Newbie

[agate!howland.reston.ans.net!usc!cs.utexas.edu!asuvax!ennews!mcdphx!schbb]

In article 260793115314@ccl-kstar-node.net.yale.edu, heman@minerva.cis.yale.edu
 (Edgardo I. Nazario) writes:
> Hi there! I recently read an article in Inforworld written by Bob Metcalf
> (the architect of Ethernet) in which he tries to convince the reader to
> switch from C to Ada. Well, I hate C and since I must believe Metcalfe
> knows what he's talking about, I am willing to try. However, where do I get
> the compiler, tools, etc. Where can I get books on the subject. Do you have
> a FAQ for this newsgroup?
> 
> Any info would be greatly appreciated. My E-mail address is
> heman@minerva.cis.yale.edu.
> 
> --Gardy--

I would like to recommend the following two books:
	Software Engineering with Ada by Grady Booch
	[When I was learning the language I used it to learn how to think
	 as an Ada programmer.]
	Programming in Ada by JGP Barnes
	[Ultimate reference manual for Ada.  The edition I have also 
	 has the Language Reference Manual.]

Here are some Commercial PC compilers:
	Alsys Inc. 1-800-995-2579/617-270-0030
	AETECH Inc. 1-619-431-7714
	Meridian Software Systems 1-800-653-2522 (least expensive of the 3)




---
David Tannen
tannend@source.asset.com
tannen@tigger.geg.mot.com
----------------------------------------------------------------------
-- "Dependance on wizardry to mitigate the fundamental limitations
--  of software is called 'hacking'."  Grady Booch.
--
-- Writing a MS-Windows application often requires hacking.
----------------------------------------------------------------------