* Build ding a distributed partition
@ 2018-04-17 12:50 Dmitry A. Kazakov
2018-04-17 15:30 ` Jeffrey R. Carter
0 siblings, 1 reply; 10+ messages in thread
From: Dmitry A. Kazakov @ 2018-04-17 12:50 UTC (permalink / raw)
What are gprbuild/gnatmake switches etc for building a distributed
partition? I found no word about it.
--
Regards,
Dmitry A. Kazakov
http://www.dmitry-kazakov.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-17 12:50 Build ding a distributed partition Dmitry A. Kazakov
@ 2018-04-17 15:30 ` Jeffrey R. Carter
2018-04-17 16:01 ` Dmitry A. Kazakov
0 siblings, 1 reply; 10+ messages in thread
From: Jeffrey R. Carter @ 2018-04-17 15:30 UTC (permalink / raw)
On 04/17/2018 02:50 PM, Dmitry A. Kazakov wrote:
> What are gprbuild/gnatmake switches etc for building a distributed partition? I
> found no word about it.
I seem to remember something called gnatdist.
--
Jeff Carter
"I was either in love, or I had smallpox."
Take the Money and Run
137
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-17 15:30 ` Jeffrey R. Carter
@ 2018-04-17 16:01 ` Dmitry A. Kazakov
2018-04-17 23:56 ` Shark8
2018-04-18 17:32 ` Simon Wright
0 siblings, 2 replies; 10+ messages in thread
From: Dmitry A. Kazakov @ 2018-04-17 16:01 UTC (permalink / raw)
On 2018-04-17 17:30, Jeffrey R. Carter wrote:
> On 04/17/2018 02:50 PM, Dmitry A. Kazakov wrote:
>> What are gprbuild/gnatmake switches etc for building a distributed
>> partition? I found no word about it.
>
> I seem to remember something called gnatdist.
Yes. I saw references to gnatdist and po_gnatdist. Neither is anywhere
to find. (:-()
Furthermore, if read descriptions right, both are to generate a
gpr-file. Therefore, there must be something in that file to tell that a
package is actually "main" of a partition with the ID so and so etc.
--
Regards,
Dmitry A. Kazakov
http://www.dmitry-kazakov.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-17 16:01 ` Dmitry A. Kazakov
@ 2018-04-17 23:56 ` Shark8
2018-04-18 7:28 ` Dmitry A. Kazakov
2018-04-18 17:32 ` Simon Wright
1 sibling, 1 reply; 10+ messages in thread
From: Shark8 @ 2018-04-17 23:56 UTC (permalink / raw)
On Tuesday, April 17, 2018 at 10:02:02 AM UTC-6, Dmitry A. Kazakov wrote:
> >
> > I seem to remember something called gnatdist.
>
> Yes. I saw references to gnatdist and po_gnatdist. Neither is anywhere
> to find. (:-()
I haven't seen a polyorb installer from AdaCore in a couple of years, but here's a Frankensteinian way you might be able to get it working:
(1) Download the latest PolyOrb [I think it's 2014] and the matching GPL GNAT.
(2) Install GNAT, be sure to remember the install location.
(3) Install PolyOrb. [I used the same location.]
(4) Install the latest GPL GNAT [or you can try FSF GNAT] in the same location as #2.
Create your distribution config file (here "Distribution.cfg"), and run "[GNAT_LOCATION]\po_gnatdist -d -PC:\Programming\Projects\[Actual_Project]\[Actual_Project].gpr Distribution"
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-17 23:56 ` Shark8
@ 2018-04-18 7:28 ` Dmitry A. Kazakov
2018-04-18 13:36 ` Shark8
0 siblings, 1 reply; 10+ messages in thread
From: Dmitry A. Kazakov @ 2018-04-18 7:28 UTC (permalink / raw)
On 18/04/2018 01:56, Shark8 wrote:
> On Tuesday, April 17, 2018 at 10:02:02 AM UTC-6, Dmitry A. Kazakov wrote:
>>>
>>> I seem to remember something called gnatdist.
>>
>> Yes. I saw references to gnatdist and po_gnatdist. Neither is anywhere
>> to find. (:-()
>
> I haven't seen a polyorb installer from AdaCore in a couple of years, but here's a Frankensteinian way you might be able to get it working:
>
> (1) Download the latest PolyOrb [I think it's 2014] and the matching GPL GNAT.
> (2) Install GNAT, be sure to remember the install location.
> (3) Install PolyOrb. [I used the same location.]
> (4) Install the latest GPL GNAT [or you can try FSF GNAT] in the same location as #2.
>
> Create your distribution config file (here "Distribution.cfg"), and run "[GNAT_LOCATION]\po_gnatdist -d -PC:\Programming\Projects\[Actual_Project]\[Actual_Project].gpr Distribution"
Thanks. Under which OS would it be best to try, Windows or Linux?
--
Regards,
Dmitry A. Kazakov
http://www.dmitry-kazakov.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-18 7:28 ` Dmitry A. Kazakov
@ 2018-04-18 13:36 ` Shark8
2018-04-18 14:15 ` Dmitry A. Kazakov
0 siblings, 1 reply; 10+ messages in thread
From: Shark8 @ 2018-04-18 13:36 UTC (permalink / raw)
On Wednesday, April 18, 2018 at 1:28:17 AM UTC-6, Dmitry A. Kazakov wrote:
>
> Thanks. Under which OS would it be best to try, Windows or Linux?
I typically use Windows as I find it to be a saner dev-environment (I've always thought case-sensitivity in the FS to be a pain); I wouldn't be surprised if you could pull the equivalent off in Linux, but I wouldn't be surprised if you couldn't either (file permissions/ownerships, for one, being incredibly fragile).
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-18 13:36 ` Shark8
@ 2018-04-18 14:15 ` Dmitry A. Kazakov
0 siblings, 0 replies; 10+ messages in thread
From: Dmitry A. Kazakov @ 2018-04-18 14:15 UTC (permalink / raw)
On 18/04/2018 15:36, Shark8 wrote:
> On Wednesday, April 18, 2018 at 1:28:17 AM UTC-6, Dmitry A. Kazakov wrote:
>>
>> Thanks. Under which OS would it be best to try, Windows or Linux?
>
> I typically use Windows as I find it to be a saner dev-environment (I've always thought case-sensitivity in the FS to be a pain); I wouldn't be surprised if you could pull the equivalent off in Linux, but I wouldn't be surprised if you couldn't either (file permissions/ownerships, for one, being incredibly fragile).
OK. I want to look into the projects gnatdist generates to figure out
how to go without it.
--
Regards,
Dmitry A. Kazakov
http://www.dmitry-kazakov.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-17 16:01 ` Dmitry A. Kazakov
2018-04-17 23:56 ` Shark8
@ 2018-04-18 17:32 ` Simon Wright
2018-04-18 17:34 ` Simon Wright
2018-04-24 9:03 ` Frédéric PRACA
1 sibling, 2 replies; 10+ messages in thread
From: Simon Wright @ 2018-04-18 17:32 UTC (permalink / raw)
"Dmitry A. Kazakov" <mailbox@dmitry-kazakov.de> writes:
> On 2018-04-17 17:30, Jeffrey R. Carter wrote:
>> On 04/17/2018 02:50 PM, Dmitry A. Kazakov wrote:
>>> What are gprbuild/gnatmake switches etc for building a distributed
>>> partition? I found no word about it.
>>
>> I seem to remember something called gnatdist.
>
> Yes. I saw references to gnatdist and po_gnatdist. Neither is anywhere
> to find. (:-()
>
> Furthermore, if read descriptions right, both are to generate a
> gpr-file. Therefore, there must be something in that file to tell that
> a package is actually "main" of a partition with the ID so and so etc.
Just saw this: https://twitter.com/adaprogrammers/status/986636433728434179
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-18 17:32 ` Simon Wright
@ 2018-04-18 17:34 ` Simon Wright
2018-04-24 9:03 ` Frédéric PRACA
1 sibling, 0 replies; 10+ messages in thread
From: Simon Wright @ 2018-04-18 17:34 UTC (permalink / raw)
Simon Wright <simon@pushface.org> writes:
> "Dmitry A. Kazakov" <mailbox@dmitry-kazakov.de> writes:
>
>> On 2018-04-17 17:30, Jeffrey R. Carter wrote:
>>> On 04/17/2018 02:50 PM, Dmitry A. Kazakov wrote:
>>>> What are gprbuild/gnatmake switches etc for building a distributed
>>>> partition? I found no word about it.
>>>
>>> I seem to remember something called gnatdist.
>>
>> Yes. I saw references to gnatdist and po_gnatdist. Neither is anywhere
>> to find. (:-()
>>
>> Furthermore, if read descriptions right, both are to generate a
>> gpr-file. Therefore, there must be something in that file to tell that
>> a package is actually "main" of a partition with the ID so and so etc.
>
> Just saw this: https://twitter.com/adaprogrammers/status/986636433728434179
GPLv3 + GCC Runtime Library Exception.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Build ding a distributed partition
2018-04-18 17:32 ` Simon Wright
2018-04-18 17:34 ` Simon Wright
@ 2018-04-24 9:03 ` Frédéric PRACA
1 sibling, 0 replies; 10+ messages in thread
From: Frédéric PRACA @ 2018-04-24 9:03 UTC (permalink / raw)
Le mercredi 18 avril 2018 19:32:24 UTC+2, Simon Wright a écrit :
> "Dmitry A. Kazakov" writes:
>
> > On 2018-04-17 17:30, Jeffrey R. Carter wrote:
> >> On 04/17/2018 02:50 PM, Dmitry A. Kazakov wrote:
> >>> What are gprbuild/gnatmake switches etc for building a distributed
> >>> partition? I found no word about it.
> >>
> >> I seem to remember something called gnatdist.
> >
> > Yes. I saw references to gnatdist and po_gnatdist. Neither is anywhere
> > to find. (:-()
> >
> > Furthermore, if read descriptions right, both are to generate a
> > gpr-file. Therefore, there must be something in that file to tell that
> > a package is actually "main" of a partition with the ID so and so etc.
>
> Just saw this: https://twitter.com/adaprogrammers/status/986636433728434179
That's really a good news. In the past few years, finding PolyORB was a pain as it disappeared from AdaCore Website and I had to find the SVN tree in my old archives.
Anyway, last time I tried to build it, it was during last FOSDEM and compilation went well, at least for CORBA application and under Linux (Ubuntu).
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-04-24 9:03 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-17 12:50 Build ding a distributed partition Dmitry A. Kazakov
2018-04-17 15:30 ` Jeffrey R. Carter
2018-04-17 16:01 ` Dmitry A. Kazakov
2018-04-17 23:56 ` Shark8
2018-04-18 7:28 ` Dmitry A. Kazakov
2018-04-18 13:36 ` Shark8
2018-04-18 14:15 ` Dmitry A. Kazakov
2018-04-18 17:32 ` Simon Wright
2018-04-18 17:34 ` Simon Wright
2018-04-24 9:03 ` Frédéric PRACA
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox