From: James Rogers <jimmaureenrogers@worldnet.att.net>
Subject: Re: Increased Interest In Ada?
Date: Fri, 23 Feb 2001 19:49:19 GMT
Date: 2001-02-23T19:49:19+00:00 [thread overview]
Message-ID: <3A96BF36.5E9B327@worldnet.att.net> (raw)
In-Reply-To: 975uv4$qbe$1@nh.pace.co.uk
Another possibility, although not exactly free, is the PC/104 solution
provided by Aonix and PharLap.
PharLap offers a very nice PC/104 RTOS implementing a subset of the
Win32 API. Aonix bundles this solution with an Ada compiler that runs
on a PC. The Aonix Ada compiler can target either the PC or the
PC/104 board, allowing simple unit testing of many packages on the
PC, and the remaining testing on the PC/104 board.
The PharLap operating system comes with a useful collection of
capabilities including LAN networking (ftp, telnet, http, TCP/IP,
etc.)
There could be additional packages created for this solution to
address devices not on the PC/104 hardware stack, such as RS232
ports, etc.
On my previous job I successfully used this system to develop
robotic control systems interfacing both with user interface
devices and vehicle control interfaces. Robotic devices were all
manufactured by our company and controlled through a Controller
Area Network (CAN) interface. We also manufactured our own
PC/104 CAN card which plugs into the PC/104 hardware stack.
Information about those products can be viewed at
http://www.omnitech.com
Jim Rogers
Colorado Springs, Colorado USA
Marin David Condic wrote:
>
> I'm going to examine the PC/104 thing a bit more thoroughly. If you think of
> any other possibilities for an SBC to which GNAT might target with minimal
> fuss, let me know... Thanks.
>
next prev parent reply other threads:[~2001-02-23 19:49 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-08 19:12 Increased Interest In Ada? Marin David Condic
2001-02-08 20:36 ` Florian Weimer
2001-02-09 0:16 ` Ken Garlington
2001-02-08 20:40 ` BSCrawford
2001-02-08 23:17 ` JF Harrison
2001-02-09 13:33 ` Marin David Condic
2001-02-09 16:41 ` David Botton
2001-02-09 13:08 ` Robert C. Leif, Ph.D.
2001-02-09 13:38 ` Marin David Condic
2001-02-09 14:24 ` Ian Wild
2001-02-09 18:40 ` Florian Weimer
2001-02-09 9:35 ` Preben Randhol
2001-02-09 13:36 ` Marin David Condic
2001-02-09 14:36 ` Preben Randhol
2001-02-09 21:21 ` Ehud Lamm
2001-02-09 21:25 ` Jeffrey D. Cherry
2001-02-12 17:43 ` Stephen Leake
2001-02-13 15:14 ` Jerry Petrey
2001-02-20 20:27 ` Frank
2001-02-21 14:51 ` Preben Randhol
2001-02-21 15:18 ` Marin David Condic
2001-02-21 20:54 ` Marin David Condic
2001-02-21 22:56 ` Jerry Petrey
2001-02-22 10:43 ` Peter Amey
2001-02-22 14:27 ` Marin David Condic
2001-02-27 11:28 ` Peter Amey
2001-02-23 4:58 ` Cesar Rabak
2001-02-23 15:15 ` Marin David Condic
2001-02-24 21:40 ` Cesar Rabak
2001-02-25 15:10 ` Marin David Condic
2001-02-26 0:34 ` Cesar Rabak
2001-02-26 14:51 ` Marin David Condic
2001-02-26 21:23 ` non-Ada, was " tmoran
2001-02-22 11:56 ` Tarjei T. Jensen
2001-02-23 15:17 ` Marin David Condic
2001-02-23 17:22 ` Tarjei T. Jensen
2001-02-23 20:40 ` Marin David Condic
2001-03-13 15:01 ` John Kern
2001-02-23 19:49 ` James Rogers [this message]
2001-02-23 20:47 ` Marin David Condic
2001-02-23 21:08 ` Randy Brukardt
2001-02-23 21:21 ` Hans-Olof Danielsson
2001-02-23 22:26 ` Jerry Petrey
2001-03-05 19:00 ` Rush Kester
2001-03-10 18:52 ` Singlespeeder
2001-03-05 19:00 ` Rush Kester
2001-03-13 14:55 ` John Kern
2001-02-26 23:49 ` Model railroad package (was: Re: Increased Interest In Ada?) Dirk Craeynest
2001-03-10 3:37 ` Increased Interest In Ada? DuckE
2001-03-12 14:53 ` Marin David Condic
2001-03-13 7:50 ` Tarjei T. Jensen
2001-03-13 14:48 ` Marin David Condic
2001-03-13 15:42 ` Tarjei T. Jensen
2001-03-13 16:31 ` Marin David Condic
2001-03-14 2:13 ` Jeffrey Carter
2001-03-14 21:36 ` Tucker Taft
2001-03-14 21:48 ` Marin David Condic
2001-03-15 16:11 ` Tucker Taft
2001-03-15 18:18 ` Marin David Condic
2001-03-15 18:37 ` Tucker Taft
2001-03-16 9:20 ` Tarjei T. Jensen
replies disabled
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox