* Looking for MS-DOS ADA Compiler!!
@ 1990-03-23 18:43 Joey Schoeph
1990-03-27 10:58 ` ADA for my favorite machine (was: Looking for MS-DOS ADA Comp...) Armin Schweizer
1990-03-27 12:22 ` Looking for MS-DOS ADA Compiler!! Gordon T Gopher at CCVAX
0 siblings, 2 replies; 6+ messages in thread
From: Joey Schoeph @ 1990-03-23 18:43 UTC (permalink / raw)
I'm in the process of learning ADA, and I have an IBM XT! I'm looking for
a compiler for ADA on my PC. If anyone could help me out, I would really
appreciate it!! Please e-mail or post!
slq@mentor.cc.purdue.edu
^ permalink raw reply [flat|nested] 6+ messages in thread
* ADA for my favorite machine (was: Looking for MS-DOS ADA Comp...)
1990-03-23 18:43 Looking for MS-DOS ADA Compiler!! Joey Schoeph
@ 1990-03-27 10:58 ` Armin Schweizer
1990-03-28 15:21 ` Edward Falis
1990-03-27 12:22 ` Looking for MS-DOS ADA Compiler!! Gordon T Gopher at CCVAX
1 sibling, 1 reply; 6+ messages in thread
From: Armin Schweizer @ 1990-03-27 10:58 UTC (permalink / raw)
Since there is a number of requests for ADA compilers for different
host and target systems, I repeat here the address of the "ADA
Information Clearinghouse":
ADA Information Clearinghouse
Rm3D139
1211 Fern Street / C-107
The Pentagon
Washington, DC, 20301-3081
phone: 703-685'1477
This organisation publishes the "ADA Information Clearinghouse Newsletter"
which contains a list of all validated compilers (including host and
target systems) as well as contacts. This publication is *FREE*. There
is also information on topics like ADA 9X, experiences in projects
of different sizes (military and commercial) etc.
some MS-DOS Compilers:
AETECH (Integrada) David Dewitt 619-755'1277
ALSYS Lee Ehrlichmann 508-890'0030
Meridian Eric Olsen 800-221'2522
R.R. Software Paul Fuller 608-244'6436
some MacIntosh Compilers:
Meridian see above
kind regards
armin
Armin R. Schweizer, CIBA-GEIGY AG, R1045.P.06, WRZ
4002 Basel / Switzerland
phone: -41-61-697'79'46
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Looking for MS-DOS ADA Compiler!!
1990-03-23 18:43 Looking for MS-DOS ADA Compiler!! Joey Schoeph
1990-03-27 10:58 ` ADA for my favorite machine (was: Looking for MS-DOS ADA Comp...) Armin Schweizer
@ 1990-03-27 12:22 ` Gordon T Gopher at CCVAX
1990-03-29 21:52 ` Jim Marks
1990-03-30 3:02 ` Mike Feldman
1 sibling, 2 replies; 6+ messages in thread
From: Gordon T Gopher at CCVAX @ 1990-03-27 12:22 UTC (permalink / raw)
In article <8766@mentor.cc.purdue.edu>, slq@mentor.cc.purdue.edu (Joey Schoeph)
writes:
> I'm in the process of learning ADA, and I have an IBM XT! I'm looking for
> a compiler for ADA on my PC. If anyone could help me out, I would really
> appreciate it!! Please e-mail or post!
>
> slq@mentor.cc.purdue.edu
--
I learnt some ADA some time ago myself, and I was very impressed, but I got the
impression that a compiler for such a language would be huge, and inquiries
seemed to indicate the same... If however, anyone does have any info - even if
the compiler can only run on a 386 with lots of ram, I'd love to hear about
it...
--------------------------------------------------------------------------------
Neil Conway H235_022@ccvax.ucd.ie | Disclaimer ? HA! I'll die of surprise if
H235_022@ccvax.bitnet | this even makes it onto the net... :-)
--------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ADA for my favorite machine (was: Looking for MS-DOS ADA Comp...)
1990-03-27 10:58 ` ADA for my favorite machine (was: Looking for MS-DOS ADA Comp...) Armin Schweizer
@ 1990-03-28 15:21 ` Edward Falis
0 siblings, 0 replies; 6+ messages in thread
From: Edward Falis @ 1990-03-28 15:21 UTC (permalink / raw)
Just a quick correction to the Alsys contact information:
Alsys, Inc. (617) 270-0030. Ask for "sales"
- Ed Falis, Alsys
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Looking for MS-DOS ADA Compiler!!
1990-03-27 12:22 ` Looking for MS-DOS ADA Compiler!! Gordon T Gopher at CCVAX
@ 1990-03-29 21:52 ` Jim Marks
1990-03-30 3:02 ` Mike Feldman
1 sibling, 0 replies; 6+ messages in thread
From: Jim Marks @ 1990-03-29 21:52 UTC (permalink / raw)
In article <903.260f5b00@ccvax.ucd.ie> h235_022@ccvax.ucd.ie (Gordon T Gopher at CCVAX) writes:
>In article <8766@mentor.cc.purdue.edu>, slq@mentor.cc.purdue.edu (Joey Schoeph)
> writes:
>> I'm in the process of learning ADA, and I have an IBM XT! I'm looking for
>> a compiler for ADA on my PC. If anyone could help me out, I would really
>> appreciate it!! Please e-mail or post!
>>
...
>...If however, anyone does have any info - even if
>the compiler can only run on a 386 with lots of ram, I'd love to hear about
>it...
>
We have two we are using here. One, from Alsys requires an AT (or 386) and
about 3-4MB of expanded (I think) memory. Therefore, it wouldn't be for you.
The other one, which we've gotten a license to use in an Ada class we're
taking, is from Meridian Software. It's called AdaVantage, and will run on
an XT (with or without a math coprocessor). Its a validated (legal) Ada
compiler with an available support environment. I haven't had a chance
to use it much (I just got it a few days ago), so I can't comment much on
its speed or the quality of the code it produces. You can get it with a
utility library, a DOS environment library and a development environment.
I didn't handle the purchase of our license, so I don't know how much it
costs (but based on the cost of our multi-user license, it must be well
over $100). I think they may also have a less capable one (possibly
a subset) for less, though. You can contact them at:
Meridian Software Systems, Inc.
10 Pasteur Street
Irvine, CA 92718
Sorry, I don't have a phone number. However, they do have an E-mail address
for support; they might be able to help you. Its
support@Meridian.COM
Hope this helps.
Jim Marks (404)894-7255 Systems Engineering Laboratory
Compuserve: 72310,2410 Georgia Tech Research Institute
uucp: ...!{decvax,hplabs,ncar,purdue,rutgers}!gatech!prism!jm21
Internet: jm21@prism.gatech.edu -or- jmarks@gtri01.gatech.edu
--
Jim Marks (404)894-7255 Systems Engineering Laboratory
Compuserve: 72310,2410 Georgia Tech Research Institute
uucp: ...!{decvax,hplabs,ncar,purdue,rutgers}!gatech!prism!jm21
Internet: jm21@prism.gatech.edu -or- jmarks@gtri01.gatech.edu
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Looking for MS-DOS ADA Compiler!!
1990-03-27 12:22 ` Looking for MS-DOS ADA Compiler!! Gordon T Gopher at CCVAX
1990-03-29 21:52 ` Jim Marks
@ 1990-03-30 3:02 ` Mike Feldman
1 sibling, 0 replies; 6+ messages in thread
From: Mike Feldman @ 1990-03-30 3:02 UTC (permalink / raw)
Meridian Software Systems (1-800-221-2522) has a version of their system
called AdaStudent. It is full Ada except for Chapter 13. Tasking, generics,
whatever, are supported as fully as their commercial product. It costs
$50.00 (that's right, fifty dollars). They will take VISA and ship by UPS;
usually takes a week or two to get it. They'll overnight it if you pay.
It's a "vanilla" system: compiler, Ada-level linker, decent debugger. No
editor, no libraries. Many of my students have used it with success; I
use it and its production-quality cousin all the time. I'm satisfied
that it's a quite respectable piece of software. Because of the missing
Chapter 13 support it can't be validated, but otherwise it is validatable -
it's the same product as the big one, which has a current validation.
The only machine requirements are 640k and a hard disk. Floating-point
is software-emulated (another difference from the big one, which can use
a coprocessor). An XT with 640k and a hard disk will be slow but serviceable.
In my opinion, it's $50. well spent to learn Ada and work with it on class
projects, etc.
If you want to spend more ($249., I think) try IntegrAda from AETech (I
don't have their number but they are in the San Diego area). This is a
Turbo-Pascal-like development environment (editor, single-keystroke commands,
etc.) wrapped around a Janus-Ada compiler. Comes with some libraries:
math, graphics, etc. Personally I like the Meridian _compiler_ better
(has a more solid "feel" to it) but IntegrAda is quite serviceable and
has the better library support (in the cheap version). Same machine
requirements as Ada Student. I am writing a book and using IntegrAda to
develop all the code for it. Development environment is great. Ignore
the pop-up menus and use the function keys. Neat and pretty fast on my
8 MHz AT. It's validated. I like Meridian's tasking support better.
In both cases, you _will_ need to give the systems as much memory as you
can, which means no TSR programs, Sidekick, terminal emulators, network
software, etc. But it's not true that you need megabytes to compile
respectable Ada code: a "standard" DOS machine is just fine.
---------------------------------------------------------------------------
Prof. Michael Feldman
Department of Electrical Engineering and Computer Science
The George Washington University
Washington, DC 20052
+1-202-994-5253
mfeldman@seas.gwu.edu
---------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~1990-03-30 3:02 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1990-03-23 18:43 Looking for MS-DOS ADA Compiler!! Joey Schoeph
1990-03-27 10:58 ` ADA for my favorite machine (was: Looking for MS-DOS ADA Comp...) Armin Schweizer
1990-03-28 15:21 ` Edward Falis
1990-03-27 12:22 ` Looking for MS-DOS ADA Compiler!! Gordon T Gopher at CCVAX
1990-03-29 21:52 ` Jim Marks
1990-03-30 3:02 ` Mike Feldman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox